Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Brake System > Caliper Tools > Disc Brake Caliper Pin Remover - Fo

Disc Brake Caliper Pin Remover - Ford

Disc Brake Caliper Pin Remover - Ford
Features:
  • Can eliminate those damaging makeshift methods of disc brake caliper pin removal.
  • Since it works on several of Ford`s light duty vehicles, it also eliminates the need for a separate tool for each model.
  • Weight: 8 oz.


  • Works on the Following Models:
    • 1989 to current Ranger, Aerostar, E-series, F-series, & Bronco
    • 1989 to 1991 Bronco II
    • 1991 to current Explorer.
    OTC 7499 Disc Brake Caliper Pin Remover - Ford 1989 - Current
    • Shipping Weight: 0.45lbs
    • Manufactured by: OTC Tools and Equipment
    • Toolsource #: 62092
    • Manufacturers Part #: 7499
    • Also Known As: OT7499, OTC-7499, OTC7499

    Usually In Stock
    Usually ships in 24-48 hours
    Manufacturer Direct

    $44.59

    Customers Also Purchased:

    • OTC 7661 Brake Caliper Hanger Set
      OTC 7661 Brake Caliper Hanger Set
      Manufacturers Part #: 7661
      Your Price: $25.58
      The next time a job requires removing either front or rear disc brakes, these hangers will pay for themselves in convenience alone.Any time there`s brake, wheel bearing, axle shaft, or suspension service to do, these hangers hold the brake calipers out of the way, & at the same time, prevent damage to the brake hose.Weight: 8 oz. OTC 7661 Brake Caliper Hanger Set ...
    • 1/2 Inch Sq Drive FW Bearing Locknut Socket Ford T86T-1197-A, Do
      1/2 Inch Sq Drive FW Bearing Locknut Socket Ford T86T-1197-A, Do
      Manufacturers Part #: 7270A
      Your Price: $42.74
      Weight: 1lb., 8oz. For use on : 1984-1992 Ford Ranger & Bronco II w/manual hubs.1986-1995 Ford F-series 1/2-truck and full-size Bronco with Dana 44 front axle.1990-1993 Dodge trucks with Dana 44 automatic hubs.Same as T86T-1197-A OTC Tools 7270A 1/2" Drive FW Bearing Locknut Socket ...
    • Disc Brake Pad Spreader - D79L-2196-A
      Disc Brake Pad Spreader - D79L-2196-A
      Manufacturers Part #: 7034
      Your Price: $34.48
      Disc Brake Pad Spreader No longer must disc brake pad installation be difficult. The No. 7034 fits between the two new pads being installed, then expands to retract the piston. Leaves both hands free to start the caliper over the rotor. After it`s started, the spreader is removed and you slide the caliper over the rotor the rest of the way. Cuts installation time dramatically. Works on all standard and four-piston caliper disc brakes. No. 7034 -...
    • Convertible Internal & External Snap Ring Pliers - Extra-Large
      Convertible Internal & External Snap Ring Pliers - Extra-Large
      Manufacturers Part #: 3152
      Your Price: $62.83
      GearWrench 3152 Features: Use on large internal and external snap rings including automatic transmissions.Unique push-button feature allows for effortless change.Fits internal rings 1-13/16 through 4" (46 through 101.6mm) and external rings 1-1/2 through 4" (38.1 through 101.6mm).Features a ratchet lock to hold the snap ring in desired position.Includes 6 pairs of color-coded alloy steel tips in sizes 0.090, 0.108 and 0.120 bent 15?and 90?.Cushi...
    • Bearing Cup Remover
      Bearing Cup Remover
      Manufacturers Part #: 7136
      Ideal for servicing hubs on today`s popular front wheel drive small cars.The cone holds the jaws in place during pulling.The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc.Jaw Spread: 15/16" to 3-1/4".Reach, to 3-1/2".Use with any slide hammer having 5/8"-18 thread (OTC 1155 or 1156 or the 927 Push-Puller).Weight: 1lb., 8oz. OTC 7136 Bearing Cup Remover ...
    • Reversible Snap Ring Pliers Set - 5 Piece
      Reversible Snap Ring Pliers Set - 5 Piece
      Manufacturers Part #: KTI55001
      Your Price: $20.86
      Features: Set includes 5 pliers.Pliers included one short straight small tip, one long straight large tip, one short 90? small tip, and one long 90? large tip. K Tool International 55001 5-Piece Reversible Snap Ring Pliers Set ...

    Customers Also Shopped For:

    • OTC 7661 Brake Caliper Hanger Set
      OTC 7661 Brake Caliper Hanger Set
      Manufacturers Part #: 7661
      Your Price: $25.58
      The next time a job requires removing either front or rear disc brakes, these hangers will pay for themselves in convenience alone.Any time there`s brake, wheel bearing, axle shaft, or suspension service to do, these hangers hold the brake calipers out of the way, & at the same time, prevent damage to the brake hose.Weight: 8 oz. OTC 7661 Brake Caliper Hanger Set ...
    • Brake Caliper Removal Tool - Ford Truck
      Brake Caliper Removal Tool - Ford Truck
      Manufacturers Part #: B82
      *this item has been discontinued
      Brake Caliper Removal Tool - Ford Truck Especially designed for removal of all Ford truck brake caliper retainers. This includes: F150 - F350 Ranger Aerostar All vans The large notched end of the tool compresses the retainer clip and initiates removal of the retainer. The opposite, smaller end of the tool is then used as a punch to drive the retainer completely out. ...
    • Industrial Metal Cutting Bimetal Jigsaw Blade, 17 Teeth / Inch
      Industrial Metal Cutting Bimetal Jigsaw Blade, 17 Teeth / Inch
      Manufacturers Part #: 30075
      Industrial Metal Cutting Bimetal Jigsaw Blade, 17 Teeth per Inch Overall length 2-3/4". Teeth pitch 1.5mm. Cuts ferrous metals 1/8" - 1/4". Cuts nonferrous metals up to 1/8". Lasts up to five times longer than carbon steel blades. Flexible, spring steel backs provide long blade life. Super-hard, high speed steel teeth for a sharp, long-lasting cutting edge. Shatterproof -- handles the toughest cutting jobs. Fits all jigsaws usin...
    • 1/2 In Dr Impact Socket, 6 Pt, Std, 9/16 In
      1/2 In Dr Impact Socket, 6 Pt, Std, 9/16 In
      Manufacturers Part #: 218
      Your Price: $4.92
      1/2" Drive Impact Socket, 6 Point, Standard, Size 9/16" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
    • 1/2 In Drive 6 Pt Deep Metric Impact Socket - 15mm
      1/2 In Drive 6 Pt Deep Metric Impact Socket - 15mm
      Manufacturers Part #: 34265
      Your Price: $17.47
      1/2 In Drive 6 Pt Deep Metric Impact Socket - 15mm Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGripr hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide. Sp...

    Current Reviews: 0