On-Vehicle Brake Lathe and Rotor Driving Unit - Coats fmr. Ammco-Coats / Hennesy

On-Vehicle Brake Lathe and Rotor Driving Unit

The Model 710 Brake Lathe and Rotor Driving Unit offer the perfect solution to correcting lateral run-out and thickness variation. The Model 710 is especially handy when removing the rotor from the vehicle is time consuming or difficult.

The rotor driving unit is designed to provide a convenient and more accurate alternative to running the vehicles` engine to turn the rotors while machining.

Mounts to caliper bracket, virtually eliminating lateral runout and thickness variation.

Max. Rotor Face Width: 3.55"

Max. Rotor Thickness: 2.25"

Direct drive (no belts).

Specifications:

Brake Lathe
• Overall Lathe Height: 9.375"
• Overall Lathe Depth: 12.6875"
• Feed Rate (w/Rotor Driving Unit): .0023/Rev
• Micrometer Graduations: .002"
• Max. Distance between Adjustable Mountng Brackets: 8.03125"
• Min. Distance between Adjustable Mounting Brackets: 1.0625"
• Electrical Requirements: 115VAC, 60HZ, 1PH, Fused at 15A; 230VAC, 50HZ, 1PH, Fused at 10A
• Lathe Weight: 18 lbs.
• Warranty: 1 year parts and labor


Rotor Driving Unit
• Overall Driving Unit Height: 58.625"
• Spindle Drive Speed: 180 RPM
• Spindle Motor: 1/2 HP
• Drive Unit Adapter Range of Movement: .002"
• Range of Motion, Up/Down for Drive Unit: 18" to 54.5"
• Electrical Requirements: Same as Brake Lathe
• Drive Unit Weight: 118 lbs.
• Warranty: 1 year parts and labor