What are the different types of cutting bits used on brake lathes, and when should I use each?

Brake lathes typically use either carbide or CBN (Cubic Boron Nitride) cutting bits. Carbide bits, like the Ammco-Coats positive rake bits for Kwikway lathes, are a good general-purpose option for many rotor materials. CBN bits are harder and more heat-resistant, making them ideal for harder or heat-treated rotors and drums, where they can maintain a sharper cutting edge for longer. Always consult your lathe manufacturer's recommendations to ensure compatibility with your specific machine and the type of material you're working on. Also, always inspect your bits for wear before each use.

What is the purpose of the different grit levels available for brake lathe stones?

Brake lathe stones come in various grits, each serving a specific purpose in the resurfacing process. Coarser grits, such as 60 grit, are used for roughing or removing significant material quickly to correct deep imperfections. Medium grits, like 220 grit, are used for finishing, to refine the surface and achieve a smooth, even finish after using a coarser grit. Using the correct grit sequence is crucial for achieving optimal brake performance and minimizing noise. For example, Ammco-Coats offers both 60-grit roughing stones and 220-grit finishing stones.

How do I choose the correct arbor size and accessories for my brake lathe?

Selecting the correct arbor size and accessories is essential for accurate and safe brake lathe operation. The arbor size must match your brake lathe's spindle diameter. Consult your lathe's manual for the correct specifications. You'll also need appropriate adapters and cones to securely mount different rotor and drum sizes. Ensure all accessories are in good condition and properly tightened before operation. Using mismatched or worn components can lead to inaccurate cuts and potentially dangerous situations. Verify the compatibility of any new accessories with your specific lathe model before use.

What safety precautions should I take when using brake lathe accessories?

Safety is paramount when operating a brake lathe. Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves. Ensure that the workpiece is securely mounted and that all guards are in place before starting the lathe. Never reach over or near moving parts, and be aware of the potential for flying debris. Regularly inspect accessories for wear or damage, and replace them as needed. Consult your lathe's manual for specific safety guidelines and operating procedures. Also, be mindful of the materials you are working with, as some may create hazardous dust when machined.

What is a 'gear shear' for an Ammco brake lathe, and what does it do?

A gear shear, like the Ammco-Coats gear shear for Ammco 4000/4100 lathes, is a small but crucial component that protects the lathe's feed mechanism. It's designed to break or shear under excessive load, preventing damage to more expensive internal gears and components if the cutting bit encounters too much resistance. If your lathe's feed stops unexpectedly, the gear shear is a likely culprit. Replacing it is a simple repair that can save significant downtime and repair costs. Always use the correct replacement shear for your specific lathe model.

How often should I replace the cutting bits on my brake lathe?

The lifespan of cutting bits varies depending on the material being cut, the depth of cut, and the overall condition of the lathe. Regularly inspect your bits for signs of wear, such as chipping, dulling, or breakage. Replace them as soon as you notice any degradation in cutting performance or surface finish. Using worn bits can lead to inaccurate cuts, increased vibration, and potential damage to the rotor or drum. Keep a supply of replacement bits on hand to minimize downtime. For example, Ammco-Coats offers carbide bits in convenient 10-packs.

What can cause chatter or vibration when using a brake lathe, and how can I prevent it?

Chatter or vibration during brake lathe operation can be caused by several factors, including loose or worn bearings, improper tool setup, excessive cutting depth, or an unbalanced rotor. Ensure that all lathe components are properly tightened and in good working order. Use sharp cutting bits and avoid excessive cutting depths. Consider using vibration dampers or support arms to minimize movement. If the problem persists, consult a qualified technician to diagnose and repair any underlying mechanical issues. Also, ensure that the rotor or drum is properly cleaned before machining to prevent contamination from affecting the cutting process.

Search

Manufacturers [more]

Ammco-Coats | 9381 | Facing and Grinding Set for Flywheels

Name: Facing and Grinding Set for Flywheels
Brand: Ammco-Coats
SKU: 91307
Price: 645.24 USD
Availability: LimitedAvailability
Rating: 3 (1 reviews)

larger image

Specifications

Model Number: 9381
Manufacturer: Ammco-Coats
Product Type: Flywheel Facing and Grinding Set

Key Features

Designed for comprehensive flywheel reconditioning, including both facing and grinding operations.
Engineered for precise material removal to achieve optimal flywheel flatness and surface finish.
Constructed with durable components suitable for demanding automotive workshop environments.
Integrates seamlessly with compatible Ammco-Coats equipment for efficient workflow.

Applications

Used in automotive repair shops for clutch service and replacement.
Applied in engine rebuilding facilities to prepare flywheels for new clutch installations.
Ideal for reconditioning flywheels to eliminate chatter, vibration, and improve clutch engagement.
Suitable for maintaining proper clutch system function and extending component life.

Benefits

Ensures precise flywheel resurfacing, leading to smooth and consistent clutch operation.
Helps eliminate common clutch issues such as slippage, chatter, and premature wear.
Contributes to extended clutch lifespan by providing an ideal mating surface.
Improves overall vehicle performance and driver comfort through enhanced clutch engagement.
Increases operational efficiency for technicians by streamlining flywheel reconditioning processes.

Other products
Ammco-Coats Homepage
Model: 91307
Manufacturers Part #: 9381
Manufactured by: Ammco-Coats
Also Known As: AMM9381

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$645.24

Add to Cart:

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

Write Review

This product was added to our catalog on Thursday 01 February, 2007.

Search

Manufacturers [more]

Categories

Ammco-Coats | 9381 | Facing and Grinding Set for Flywheels

Specifications

Key Features

Applications

Benefits

$645.24

Customer Service

Popular Manufacturers

Popular Categories