Brake Cylinder Flex-Hone - 2-5/8 In x 8 In - 400 Grit - Brush Research

Brush Research | Brake Cylinder Flex-Hone - 2-5/8 In x 8 In - 400 Grit | BC2-5/8400

Features:

• Silicon carbide abrasive type.
• A resilient, flexible honing tool with a soft cutting action.
• The abrasive globules each have independent suspension that assures the Flex-Honer to be self-centering, self-aligning to the bore, and self-compensating for wear.

Applications:

• Used for honing brake cylinders.
• Can be used on a variety of materials, including cast iron, steel, and aluminum.

Benefits:

• Provides a smooth, uniform finish on the brake cylinder bore.
• Helps to improve the performance of the brake system.
• Reduces the risk of brake failure.

How to Use:

1. Inspect the brake cylinder bore for any damage.
2. Apply a light coat of honing oil to the bore.
3. Insert the Flex-Hone into the bore and begin honing.
4. Hone the bore until it is smooth and free of scratches.
5. Remove the Flex-Hone from the bore and clean it with a clean cloth.

Cautions:

• Do not use the Flex-Hone on a brake cylinder that is leaking.
• Do not use the Flex-Hone on a brake cylinder that is hot.
• Do not use the Flex-Hone on a brake cylinder that is damaged.

Technical Specifications:

• Abrasive type: Silicon carbide
• Bore size: 2-5/8 In x 8 In
• Grit size: 400 Grit
• Length: 8 In
• Width: 2-5/8 In
• Weight: 1 lb

Order Now and Get a Free Brake Cylinder Honing Guide!