Coster Steel Auto Body Spreaders - 1, 2, 3, 4 In

Made from European clock spring steel.

Flexes to contour then springs back.

Has a non-nick edge fro a smooth and exact spread.

The best spreader on the market.

GL Enterprises 1100 4 Steel Spreaders - 1", 2", 3", 4"

Manufactured by: GL Enterprises
Toolsource #: 105285
Manufacturers Part #: 1100
Also Known As: CO1100, GLE-1100

We have 14 in stock

Inventory available from other suppliers, prices may be different

Write Review

$6.87

Frequently bought together:

3 Steel Blade Spreader 4"

Add this item to your cart and save $1.91 when purchased with the product above.
Discount applied at checkout.

Customers Also Purchased:

2 Steel Spreaders - 6"

Manufacturers Part #: 1102
Your Price: $6.41
2 Steel Spreaders - 6" 1102 Coster Steel Auto Body Spreader Carded Made from European clock spring steel Flexes to contour then springs back Has a non-nick edge fro a smooth and exact spread The best spreader on the market Image is representative of product, but may vary from actual item GL Enterprises 1102 2 Steel Spreaders - 6" ...
Add to Cart Details
Plastic Mixing Board- Orange

Manufacturers Part #: 1700
Your Price: $3.40
Plastic Mixing Board- Orange 1700 Mix Board Plastic Made from thinner resistant polypropylene Designed to hold a bigger load Image is representative of product, but may vary from actual item GL Enterprises 1700 Plastic Mixing Board- Orange ...
Add to Cart Details
Two-Holer Body & Fender Dent Puller Master Shop Kit

Manufacturers Part #: TH12000
Your Price: $179.13Includes Free Shipping
The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
Add to Cart Details
Rocker-Doctor Universal Tie Down & Pull Clamp

Manufacturers Part #: TH14000
Your Price: $87.55
The clamp is made of U.S. Chrome Moly Tool Steel & has a four ton capacity.It will effectively straighten door frames, quarter panels, hoods, fenders, rocker panels, rear decks & sub frames.A new low cost uni-body tie down & pull clamp that will pull sheet metal panels better than any other method, where no access to the back is available & straight line pulling is required.It is a method approved for pulling the new hi-carbon steel box members ...
Add to Cart Details
Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover

Manufacturers Part #: TH28000
Your Price: $38.18
Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover Air impact screw & fastener removal tool that uses standard, changeable, 5/16" hex insert bits that fit any or all fasteners & screws used today.It is used in conjunction w/ a standard air hammer, w/ safety spring, at low air pressures.The tool will loosen rusted, corroded, undercoated, painted, dirty, & overly tightened screws fast & efficiently.Vibration shakes the screw loose while you ...
Add to Cart Details
Needle Nose Pliers Set 4 Pc

Manufacturers Part #: 3600
Your Price: $49.61
Pliers with straight, 20°, 45° and 90° angled noses Heat treated forged alloy steel for strength and performance Extra long design for access into limited clearance areas Soft comfort grip handles Heavy duty canvas pouch for convenient storage Sunex 3600 4 Piece Needle Nose Pliers Set 11" ...
Add to Cart Details

Customers Also Shopped For:

Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover

Manufacturers Part #: TH28000
Your Price: $38.18
Wivco TH28000 Shake-N-Break(TM) Air Impact Screw Remover Air impact screw & fastener removal tool that uses standard, changeable, 5/16" hex insert bits that fit any or all fasteners & screws used today.It is used in conjunction w/ a standard air hammer, w/ safety spring, at low air pressures.The tool will loosen rusted, corroded, undercoated, painted, dirty, & overly tightened screws fast & efficiently.Vibration shakes the screw loose while you ...
Add to Cart Details
Anti-Static Wrist Strap

Manufacturers Part #: 7744
Your Price: $49.23
OTC 7744 Features: Static electricity can be a real shock to a vehicle`s delicate electronic system.This one size fits most anti-static wrist strap will virtually eliminate the possibility of damage due to static electricity.By wearing the wrist strap & connecting the alligator clip to a good ground, the technician can work on electronic components without worrying about static damage.Includes a 6 foot coil cord w/ alligator clip that allows fre...
Add to Cart Details
Two-Holer Body & Fender Dent Puller Master Shop Kit

Manufacturers Part #: TH12000
Your Price: $179.13Includes Free Shipping
The Two-Holer gets its name from the fact that the user makes two holes in the uni-body sheet metal from the front. Insert the Z shaped bar into one hole. Insert the pulling hook, which grasps the bar at the center of its length, into the second hole. pull is then made by hydraulic power in which the user has total command over the sheet metal panel. Although this sounds like a simple tool, a look at the kit shows the care and planning that has g...
Add to Cart Details
54 Piece Super Pro Complete Car Opening Set

Manufacturers Part #: SPRO
54 Piece Super Pro Complete Car Opening Set SPRO Features and Benefits: This 54 piece complete car opening set will open virtually any vehicle with ease Our most complete set High quality in-the-door tools Best selling accessories included Heavy duty carrying case The Super Pro Complete Set is the most complete lockout set from Access Tools. Using the included Car Opening Manual, all basic car opening procedures are outlined in detail to make loc...
Add to Cart Details
NYLON PROTECTION SUIT (MEDIUM

Manufacturers Part #: 2225
Your Price: $41.59
• Made from premium nylon for maximum wear • Protects from paint overspray and vapors • Anti-static coated • Washable for many uses • Great savings over disposable suits • All the extra features that a painter would want...
Add to Cart Details
Metric Double Box Gearwrench Set - 6 Pc

Manufacturers Part #: 9260
Your Price: $90.72
72 tooth ratchets - Only 5? swing to move fastener.Fully polished.SurfaceDriver box ends.Lifetime Manufacturer`s Warranty.Includes: 8mm x 9mm, 10mm x 11mm, 12mm x 13mm, 14mm x 15mm, 16mm x 18mm and 17mm x 19mm. KD Tools 9260 6-Piece Metric Double Box Gearwrench Set ...
Add to Cart Details