Detailing Triage: When to Walk Away from a Mold-Infested Interior (and What to Do If You Don’t)
A technician-first guide to assessing severe interior contamination. Learn when to decline, how to price, what PPE and tools you need, safe work steps if you proceed, and when replacement is the smarter, safer play.
Rescuing a Torn-Down Dash After a Heater Core Job (Ford F-150 Case Study)
Dash blown apart mid-job? Here’s a structured, technician-grade process to reassemble an F-150 (and similar trucks) after a heater core replacement, with safety tips, fastener triage, HVAC plenum rebuild, wiring strategy, testing, and proper coolant fill.
Metal vs. Paper Water Pump Gaskets (Toyota and Beyond): How to Choose, Seal, and Install Correctly
Technician guide to selecting and installing the correct water pump gasket. Covers Toyota kits that include two gaskets, surface prep, sealants, torque sequence, and leak checks.
Stop Bumper Color Mismatches: A Technician’s Guide to Accurate Paint Matching and Blending
When a freshly painted bumper doesn’t match the fender or hood, it’s rarely “just the code.” This technician-oriented guide covers how to verify the mismatch, pick the right variant with a scan and spray-outs, control primer and substrate variables, blend correctly, and document the process for insurers.
Are Pneumatic Air Bag Jacks Safe? A Technician’s Guide to Lifting and Supporting Vehicles
A practical, technician-oriented guide to using pneumatic air bag jacks and hydraulic jacks safely. Covers jack vs stand roles, proper lift points, compressor requirements, and a concise pre-lift checklist.
Trailer Axle Over or Under the Leaf Springs? A Technician’s Guide to Height, Camber, and Safe Conversions
Decide whether to mount a trailer axle above or below the leaf springs, understand camber, calculate height change, gather the right parts, and convert safely without flipping the axle tube.
Build a Wall‑Mounted Pressure Washer and DI Water Station in Your Garage
Technician-oriented walkthrough for a clean, reliable wall‑mounted pressure washer and DI water setup: plan the layout, choose components, plumb a serviceable DI bypass, mount safely to studs or slatwall backers, and maintain for long life.
Follow us on social media