Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Engine Repair > Bearing - Bushing Pullers & Inst > Pilot Bearing Puller - 1/2 to 2 In Spre

Pilot Bearing Puller - 1/2 to 2 In Spread

Pilot Bearing Puller - 1/2 to 2 In Spread
  • Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.
  • Also very practical for pulling motor, generator, & magneto bearings.
I.D. Max. Spread2"
I.D. Min. Spread1/2"
Reach1 3/4"
Weight4 lbs. 14 oz.

OTC 1172 Pilot Bearing Puller - 1/2" to 2"
  • Shipping Weight: 4lbs
  • Manufactured by: OTC Tools and Equipment
  • Toolsource #: 62732
  • Manufacturers Part #: 1172
  • Also Known As: OT1172, OTC-1172, OTC1172

Only 8 left in stock - order soon

Inventory available from other suppliers, prices may be different

List Price: $82.00
You save: $8.21
$73.79

Frequently bought together:

  • Add this item to your cart and save $3.23 when purchased with the product above.
    Discount applied at checkout.

Related Products

  • Front Hub Puller for 4WD Vehicles
    Front Hub Puller for 4WD Vehicles
    Manufacturers Part #: 7901
    Your Price: $90.16
    Front Hub Puller for 4WD Vehicles Needed to remove the front hub assembly when wheel bearing or brake rotor service is required. Services 3/4- and 1 -ton 4WD pickups with 8-bolt hubs: 1994 and newer Dodge Ram and 1988 and newer Chevrolet and GM. For maxi- mum pulling force, use OTC`s No. 7703 10-lb. slide hammer. Wt., 5 lbs. ...
  • Crankshaft Balancer Puller Adapter Set for GM
    Crankshaft Balancer Puller Adapter Set for GM
    Manufacturers Part #: 7911
    Your Price: $45.13
    Crankshaft Balancer Puller Adapter Set for GM Includes shulder bolts and spacer adapter. Wt., 8 oz. ...
  • Crankshaft Balancer Puller Kit for GM
    Crankshaft Balancer Puller Kit for GM
    Manufacturers Part #: 7912
    Your Price: $105.43Includes Free Shipping
    Everything you need to pull harmonic balancers with three tapped holes.The shoulder bolts are designed to prevent them from being installed too deply, protecting the crank sensor and/or interrupter rings from damage.The spacer adapter gives the puller`s forcing screw something to push against.The kit works on 1990 and newer 3300 and 3800 V-6 engines.Includes No. 518 Flange-type Puller and No. 7911 Adapter Set.The 7911 Adapter Set consists of the...
  • GM Steering Wheel Puller Legs
    GM Steering Wheel Puller Legs
    Manufacturers Part #: 7929A
    Your Price: $20.29
    Legs do the work of three separate Kent-Moore tools: J-42120, J-42578, and J-36541-A.GM eliminated the tapped holes in the steering wheel assembly on late model cars and vans, making these puller legs the only way to remove the wheel without damage. They`re used with OTC steering wheel puller No. 7245 or 7403 to get behind the steering wheel assembly to give a straight, even pull. Works on: Pontiac: 1988-93 Lemans; 1997-current Grand Prix, Tran...
  • Ford Vacuum Front Hub Release Tool Set w/ Puller
    Ford Vacuum Front Hub Release Tool Set w/ Puller
    Manufacturers Part #: 7932
    Your Price: $104.27Includes Free Shipping
    Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...
  • 8-Way Slide Hammer Puller Set
    8-Way Slide Hammer Puller Set
    Manufacturers Part #: 7947
    Your Price: $175.93Includes Free Shipping
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross-head, cone, 2-way cross-block, puller hook attachment, pulling jaws (3) for internal or external pulling jobs, grip wrench adapter with single lead (wrench not included) and a dent puller attachment.Also ...
  • 10-Way Slide Hammer Puller Set
    10-Way Slide Hammer Puller Set
    Manufacturers Part #: 7948
    Your Price: $335.56Includes Free Shipping
    You can pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. Jaws can be set up for 2/3 way internal or external pulling jobs. Includes: No. 1155 - Slide hammer w/5 lb. hammerNo. 7372 - Rear axle pulling attachmentNo. 24544 - 3-way cross headNo. 24545 - ConeNo. 27241 - 2-way cross blockNo. 27315 - Puller hook attachmentNo. 34698 - Pulling jaws (3) for internal or external pulling jobsNo. 205378 - Grip wrench ada...
  • Puller Adapter 5/8-18 Female To 1/4-20 Male
    Puller Adapter 5/8-18 Female To 1/4-20 Male
    Manufacturers Part #: 8000
    Your Price: $13.53
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Female end 5/8" - 18, Male end 1/4" - 20, Length 2 1/4" ...
  • Puller Adapter 5/8-18 Female To 5/16-18 Male
    Puller Adapter 5/8-18 Female To 5/16-18 Male
    Manufacturers Part #: 8001
    Your Price: $12.39
    Male-Female Threaded Adapters For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc.Female end 5/8" - 18, Male end 5/16" - 18, Length 2 1/4" ...

Customers Also Purchased:

  • Clutch Aligning Tool Set
    Clutch Aligning Tool Set
    Manufacturers Part #: 2420
    Your Price: $21.54
    Limited supply! Aligns single disc clutches on American and imported cars, light trucks, and tractors.Adapter fits through clutch plate and into pilot bushing or bearing.Tapered cone fits into clutch hole and aligns clutch plate properly..Includes shaft and eight two- stepped pilot bearing adapters: for 16 sizes.Plate aligning cone has 1-1/8" maximum diameter taper. KD Tools 2420 Clutch Aligning Tool Set ...
  • Vernier Caliper w/ Fine Adjustment 0 - 8 In
    Vernier Caliper w/ Fine Adjustment 0 - 8 In
    Manufacturers Part #: 72-058-008
    Your Price: $34.12
    Vernier Caliper with Fine Adjustment 0 - 8" Fowler`s line of fine quality vernier calipers measure accurately in inch or metric with vernier scales in graduations of .001 and .02mm. Special Features: Made of fully hardened stainless steel; microfine black graduations on satin chrome finish for easy precise reading.All models offer a depth rod which can be read directly from verniers.Measuring faces are ground and lapped for extreme accuracy.4-wa...
  • GM Hydraulic Clutch Line Disconnect Tool - J-42371, J-36221
    GM Hydraulic Clutch Line Disconnect Tool - J-42371, J-36221
    Manufacturers Part #: 7910
    Your Price: $29.99
    Similar to Kent-Moore J-42371, J-36221. Damage-free way to reach and disconnect the clutch line from the slave cylinder during clutch master cylinder, slave cylinder, or clutch assembly service. Bent end works on NVG3500 manual transmissions on 1996 and newer full-size 2WD and 4WD trucks, S-1Os, and S-15 Blazers/Jimmys. The quick connect fitting on the slave cylinder is recessed in the bell housing on these vehicles. The straight end is for ...
  • Brass Drift Punch Set - 3 Pc
    Brass Drift Punch Set - 3 Pc
    Manufacturers Part #: 6323
    Set Contains: 3/8 In Brass Drift Punch.1/2 In Brass Drift Punch.3/4 In Brass Drift Punch.Packaged in plastic tray. ...
  • Inner Tie Rod Tool
    Inner Tie Rod Tool
    Manufacturers Part #: 45750
    Your Price: $63.83
    Inner Tie Rod Tool Includes an additional 1-1/2" Crows Foot for Chevrolet Colorado and GMC Canyon.Works on tie rods with inaccessible flats.Many inner tie rod end sockets do not have a complex hex on the full length of the socket.The rounded socket ends prevent access to the wrench flats.This tool utilizes six crows feet to engage the wrench flats.Long socket slips over tie rod end and connects to the crows foot.The inner tie rod can be removed ...
  • Ratcheting Chain Wrench - 3 In to 6 3/4 In OD
    Ratcheting Chain Wrench - 3 In to 6 3/4 In OD
    Manufacturers Part #: 7401
    Your Price: $83.33
    Head design permits turning in either direction without removing wrench from the work.Ratcheting action also makes it possible to regrip without removal.Handles parts of most any shape... round, square, hexagon, octagon.For larger jobs; has a 19" handle.Weight: 5 lbs. 3 oz. OTC 7401 Ratcheting Chain Wrench - 3"-6 3/4" OD ...

Customers Also Shopped For:

  • Hub and Dust Cap Pliers
    Hub and Dust Cap Pliers
    Manufacturers Part #: V216
    Your Price: $33.68
    Quickly removes all types of decorative wheel covers. Also removes and replaces the most stubborn dust caps. VIM Tools V216 Hub and Dust Cap Pliers ...
  • Pilot Bearing Puller
    Pilot Bearing Puller
    Manufacturers Part #: 9001
    Your Price: $19.64
    Pilot Bearing Puller This item supersedes SK 92522 When working space is limited, this type of puller is needed to remove flywheel pilot bearings from autombiles, trucks, and tractors.Only 7 1/2" long.Can also be used to pull bearings or bushings from generators or starters.Includes 1/2" to 1 1/4" ID Capacity jaws.Strength - helps pull out tough bearings.Short length - allows reach into tighter areas.Versatility - works on automobiles, trucks, a...
  • Pilot Bearing Puller w/Slide Hammer
    Pilot Bearing Puller w/Slide Hammer
    Manufacturers Part #: 28
    Your Price: $37.92
    Pilot Bearing Puller w/Slide Hammer 28 Removes bearings or bushings on flywheel, pump, generator,etc. Includes 1/2-in. to 1 3/8-in. (13mm to 32mm) I.D. capacity jaws. Includes 3lb. Slide Hammer Cal-Van Tools 28 Pilot Bearing Puller w/Slide Hammer  ...
  • Universal Cam Spoke Lock - Device
    Universal Cam Spoke Lock - Device
    Manufacturers Part #: 2727
    Your Price: $105.59Includes Free Shipping
    Sir Tools 2727 Universal Cam Spoke Lock - Device Needed for securing Twin Cam Pulleys. Applicable: All twin or quad cam engines with timing belt pulley sprocket on each cam. Except SubaruFor the crucial task of securing twin cam pulleys from rotating during the R&R of timing belt.Fully adjustable, this tool comes complete with 1 pair 8" and 1 pair 4.5" long, Left/Right hand threaded rods. The shorter needed for confined spaces where the rods mig...
  • Pilot Bearing Puller - 7/8 to 2 1/8 In
    Pilot Bearing Puller - 7/8 to 2 1/8 In
    Manufacturers Part #: 1171
    Your Price: $94.31
    Pilot Bearing Puller - 7/8 to 2 1/8 In Versatile puller built specially for inside pulling jobs, & particularly for removing flywheel pilot bearings on automobiles, trucks, & tractors.Also very practical for pulling motor, generator, & magneto bearings. I.D. Max. Spread 2 1/8" I.D. Min. Spread 7/8" Reach 1" Weight 4 lbs. 14 oz....
  • Ford Vacuum Front Hub Release Tool Set w/ Puller
    Ford Vacuum Front Hub Release Tool Set w/ Puller
    Manufacturers Part #: 7932
    Your Price: $104.27Includes Free Shipping
    Ford Vacuum Front Hub Release Tool Set For CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull them without damage. Removal clips slip into the slots on the hub to release the connection, puller contains the clips and hub for removal. Designed for 1998 and newer 4X4s with vacuum front hubs: Ra...

Current Reviews: 0