For the quick, safe and professional removal and installation of the suspension ball joint found at front axle wishbones. For this, the hydraulic cylinder KL-0040-2500, press frame KL-0039-1140, adaptor KL-0039-1002 and pressure spindle KL-0039-1930 are needed in addition.
Removal and installation of the suspension ball joint can be carried out in situ on the vehicle, within a few minutes, without the need for dismantling the wishbone.
Note: Alternatively, the KL-1210-221 sleeve set can also be used on an appropriate workshop press. Removal and installation of the suspension ball joint can be carried out in situ on the vehicle, within a few minutes, without the need for dismantling the wishbone. Note: Alternatively, the KL-1210-221 sleeve set can also be used on an appropriate workshop press. Suitable for Renault and Dacia on the suspension joint of the front axle whishbone.
o For a simple removal and installation of the suspension joint directly on the vehicle
o Unnecessary to remove the corresponding wishbone
o Additional drive parts required!
o Can be alternatively used on a stand press Code: 3123707 | Part No.: KL-1210-221 | Drive type: hydraulic, mechanical | Weight: 1,6 kg
Follow us on social media