Track Rod Socket, 30mm (waf) - Gedore

For quick and professional loosening and adjusting of sluggish tie rods. Required in case of adjustment work as well as when replacing the tie rod head. The special split design of the tie rod spanner completely encloses the mating surfaces on the adjusting thread of the tie rods. This ensures uniform force transmission to the adjustment thread and prevents slipping. Conventional open-end spanners are usually too wide or expand under the high force required. This eliminates the need for an expensive replacement of the entire tie rod. Suitable for tie rods with SW 30 adjustment thread, e.g. on Deutz-Fahr, Fendt, Claas, etc.
o For quick and professional loosening and adjusting of sluggish tie rods
o Closed force transmission via the mating surfaces
o No slipping or expansion as with the open-end spanner
o Conventional open-end spanners are too wide
o No need to replace the tie or push rod Code: 3442748 | Part No.: KL-0169-83 | Size (waf): 30 mm | for profile: 2-kant, 6-kant | Drive: 3/4" | Version: divided | Length: 120 mm | Weight: 400 g