Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Tire Tools, Wheels & Suspension > Ball Joint - Tie Rod Tools > Ball Joint Separat

Ball Joint Separator

Ball Joint Separator
J-36607 is required to separate the front suspension shock module yoke from the lower control arm. Attempts to separate the shock moduel yoke from the lower control arm without J-36607 will result in increased labor time and/or component damage.
  • J-36607 is installed over the ball stud.
  • The ball stud nut is rotated counterclockwise and reacts against the top surface of J-36607 and safely forces the separation of the ball stud from the tapered interface.
Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is placed.

Kent-Moore J-36607 Ball Joint Separator
  • Shipping Weight: 1lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 112166
  • Manufacturers Part #: J-36607
  • Also Known As: KMJ36607

Only 1 left in stock - order soon

$134.23

Related Products


Customers Also Shopped For:

  • Ball Joint Separator
    Ball Joint Separator
    Manufacturers Part #: J-41820
    Your Price: $314.61Includes Free Shipping
    Ball Joint Separator J-41820 Tool Number: J-41820 Tool Name: BALL JOINT SEPARATOR Applications: 97 U VAN, W CAR '97 U VAN, W CAR The steering knuckle has changed on the 1997 and later W-cars and U-vans. There is a limited clearance between he control arm and the steering knuckle that prevents previously essential ball joint separator from being used. Kent- Moore KM J-41820 Ball Joint Separator ...
  • Ball Joint Separator Tool
    Ball Joint Separator Tool
    Manufacturers Part #: J-43631
    Your Price: $207.91Includes Free Shipping
    Ball Joint Separator Tool J-43631 Tool Number: J-43631 Tool Name: Ball Joint Separator Tool Applications: C/K TRUCK C/K TRUCK Current tools do not have a large enough opening to accept the ball joint of the GMT800. Using a hammer to remove the ball joint can cause damage to the ball joint and related components. This tool applies extreme pressure on the ball joint stud to break it loose. Loosen the ball joint nut. Install the tool o...
  • 3/4 In Dr Impact Socket, 6 Pt, Std, 15/16 In
    3/4 In Dr Impact Socket, 6 Pt, Std, 15/16 In
    Manufacturers Part #: 430
    Your Price: $9.09
    3/4" Drive Impact Socket, 6 Point, Standard, Size 15/16" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
  • 3/8 In Drive 6 Pt Swivel Metric Impact Socket - 22mm
    3/8 In Drive 6 Pt Swivel Metric Impact Socket - 22mm
    Manufacturers Part #: 33372
    Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGripr hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide. Specifications: Size - 22mm Diameter - 0.91" Ov...
  • General Motors Rail Pulling Bracket
    General Motors Rail Pulling Bracket
    Manufacturers Part #: 3520
    Your Price: $81.32
    A SOLID HOOK-UP FOR A PRECISE AND SECURE PULL After removing the energy absorbing device or isolator, replace and / or attach in its place the Mo - Clamp Frame Rail Pulling Bracket designed specifically for the body style of the vehicle you are repairing. Use the pulling brackets in combination with other body pulls for the desired results. 3-ton capacity. Certain U.S. patents apply. ...
  • Ball Joint / Truck Brake Anchor Pin / U-Joint Press
    Ball Joint / Truck Brake Anchor Pin / U-Joint Press
    Manufacturers Part #: 43620
    Your Price: $143.07Includes Free Shipping
    Ball Joint / Truck Brake Anchor Pin / U-Joint Press Removes and installs press fit type ball joints found on cars and light trucks. Tool makes removing and installing truck brake anchor pins fast and easy. Also works on u-joints to press joint from the drive shaft for replacement. Tool comes with detailed instructions and a heavy-duty plastic storage case. ...

Current Reviews: 0