Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Tire Tools, Wheels & Suspension > Axle Nut Sockets > Toyota / Lexus 30mm Front Axle Lock Nut Remover K

Toyota / Lexus 30mm Front Axle Lock Nut Remover Kit

Toyota / Lexus 30mm Front Axle Lock Nut Remover Kit
This unique tool combines a 30 mm, 12 point special depth 1/2 inch drive impact socket with a axle nut lock ring release tool to unlock the 30 mm axle nut found on many Toyota & Lexus vehicles. This release tool has a patent pending unique angle that allows the technician to easily unlock the 30 mm axle nut. Failing to unlock the detent portion of the axle nut prior to removing the nut often results in damaging the axle beyond repair.
  • Made from heat treated steel, these two tools makes this job a snap.
  • Applies to: Toyota Avalon 2002 and later, Camry 2002 and later, Corolla 2003 and later, Prius 2001 and later, Sienna 2002 and later, Solara 2004 and later, Lexus ES300 2002-2003, ES330 2004 and later, LS400 1990-2000, RX330 2004 and later.
  • Lock nut release tool effectively unlocks axle nut eliminating thread damage.
Schley Products 65400 Toyota / Lexus 30mm Front Axle Lock Nut Remover Kit
  • Shipping Weight: 1.5lbs
  • Manufactured by: Schley Products, Inc
  • Toolsource #: 98719
  • Manufacturers Part #: 65400
  • Also Known As: SCH65400, SL65400, SLY-65400

Only 2 left in stock - order soon

Inventory available from other suppliers, prices may be different

List Price: $39.00
You save: $3.72
$35.28

Frequently bought together:


Related Products

  • Flywheel Lock - Volkswagen & Porsche
    Flywheel Lock - Volkswagen & Porsche
    Manufacturers Part #: 80350
    Your Price: $13.49
    This universal flywheel lock has been designed for use on all air-cooled Volkswagen engines (type 1, 2, 3, & 4) and on all air-cooled Porsche engines (series 356, 912, 914, & all 911s through 1969). This tool is a must when changing a flywheel or its seal and it comes in handy when changing a clutch. Made from a forging, this quality tool will last a lifetime....
  • Clutch Alignment Tool - Volkswagen
    Clutch Alignment Tool - Volkswagen
    Manufacturers Part #: 81251
    Your Price: $8.75
    This clutch alignment tool has been designed to center the clutch disk with the pressure plate when it is installed. If this is not done accurately the gearbox mainshaft will not be able to locate the splines of the clutch disk hub, and it will be impossible to fit the gearbox to the engine. The use of this tool is a must whenever changing a clutch. It is made of glass filled nylon for strength and held to exact tolerances for an ideal fit. ...
  • CIS Fuel Injector Puller - Volkswagen Porsche & Audi
    CIS Fuel Injector Puller - Volkswagen Porsche & Audi
    Manufacturers Part #: 83400
    Your Price: $7.02
    This handy tool has been developed to easily remove CIS fuel injectors on many in-line engines including all gasoline water-cooled Volkswagen, Porsche 924, and Audi automobiles.In operation, this tool fits down around the injector base and with the use of a screwdriver as a lever it "pops" out the injector eliminating possible damage to the injector hose and to one`s hands.Made from quality steel, this tool comes with a SP High Tech black finish...
  • Clutch Adjusting Wrench - Volkswagen
    Clutch Adjusting Wrench - Volkswagen
    Manufacturers Part #: 86250
    Your Price: $6.45
    This slick tool has been designed to simplify the task of adjusting clutch cables on air-cooled VW`s having wing nuts. This tool has four gripping areas, rather than the wing nut`s two, which provide for greater leverage and ease in turning the nut. Made of quality steel, this tool comes with a black finish. ...
  • VW Audi Volkswagen Tension Pulley Spanner Wrench SP Tools
    VW Audi Volkswagen Tension Pulley Spanner Wrench SP Tools
    Manufacturers Part #: 86400
    Your Price: $16.70
    This tool, for use on VW`s and Audi`s, has been designed to allow for the easy adjustment of the camshaft spur belts having idler pulleys with pin holes. In operation, this spanner wrench with its protruding pins, grips the center of the idler pulley and rotates it around its off-center retaining bolt. This rotation then allows for camshaft spur belt tension adjustment. Made from heat treated alloy steel, this unique tool comes with a black fini...
  • Strut Shock Lower Nut Socket - VW & Audi
    Strut Shock Lower Nut Socket - VW & Audi
    Manufacturers Part #: 87300
    Your Price: $13.35
    Unique tool has been designed to allow for the easy removal and installation of the shock retaining nuts used on most front wheel drive Volkswagens and Audi`s.Removal of the lower nut is difficult as it is round on the outside and only has a slot across the top for gripping. The shock shaft can also rotate and must be held from turning when the nut is removed or installed. Has a slot drive to fit the slot in the top of the lower retaining nut, an...
  • Bench Head Stand
    Bench Head Stand
    Manufacturers Part #: 88150
    Your Price: $33.45
    For use on Aluminum & Steel Heads This premium head stand has been designed for use on most all cylinder heads. In operation, it holds the head off the bench for valve work, head cleaning and assembly. Its holding rods have a long 5 inch taper which allows them to go further into the stud hole for more contact in the hole and a firmer grip on the head. These holding rods are also heat treated to remain smooth for use on aluminum heads. This un...
  • Valve Adjusting Tools - Toyota & Lexus
    Valve Adjusting Tools - Toyota & Lexus
    Manufacturers Part #: 88250
    Your Price: $28.22
    This unique tool has been designed to allow for easy valve adjustment on most Toyota`s overhead camshaft engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action then moves the shim and its valve lifter down awayfrom the camshaft lobe. In this down position the separate wedge tool is placed between the valve lifter ledge and ...
  • Replacement Spacer Wedge - Toyota & Lexus
    Replacement Spacer Wedge - Toyota & Lexus
    Manufacturers Part #: 88251
    Your Price: $6.55
    This unique tool has been developed to allow for easy valve adjustment on most Toyota`s overhead camshaft engines using spacer shims for valve adjustment. Made from quality heat treated alloy steel. Schley 88251 Replacement Spacer Wedge (6 & 7 mm) for Toyota & Lexus ...

Customers Also Purchased:

  • Harmonic Damper Pulley Holding Tool - Lexus & Toyota
    Harmonic Damper Pulley Holding Tool - Lexus & Toyota
    Manufacturers Part #: 64300
    Your Price: $63.52
    Lexus 1990 and later: 3.0L L6, 3.0L V6, 4.0L V8, 4.7L V8Toyota 1996 and later: 3.3L V6, 4.0L V6, 4.7L V8 .Allows the technician to hold the pulley stationary for center bolt removal and installation.240 ft-lbsightening spec for center bolt makes this tool essential for pulley removal and installation. (Refer to factory specs for proper bolt installation and torque setting).Patent Pending. Schley Products 64300 Lexus & Toyota Harmonic Damper Pull...
  • Universal Long Reach Spark Plug Boot Puller
    Universal Long Reach Spark Plug Boot Puller
    Manufacturers Part #: 65350
    Your Price: $33.45
    Universal Long Reach Spark Plug Boot Puller Long reach to grab down to the bottom of the spark plug boot.Tips have a gripping ledge to go under the spark plug boot.Tips have a vertical ribs to grip the spark plug boot to help break it loose.Swivel design for any angle of approach which allows the use of a lever block to pop the spark plug boot off.This tool works on all types of vehicles....
  • HCS Metric Thread Plug Tap - 8mm - 1.00mm
    HCS Metric Thread Plug Tap - 8mm - 1.00mm
    Manufacturers Part #: 1733
    Your Price: $2.81
    High carbon steel metric thread tap -8mm - 1.00mm.Ideal for auto repair where metric threads are specified.Durable vinyl pouch protects taps when not in use.Made in USA....
  • Diamond Grip Latex Gloves 100/Box - Large
    Diamond Grip Latex Gloves 100/Box - Large
    Manufacturers Part #: MF300L
    Your Price: $12.78
    The Diamond Grip Glove is tough and reliable, yet is also exceptionally comfortable. Comfort and performance in one glove.Provices an exceptional balance of performance, comfort and durability.Controlled manufacturing process for greater product consistency.Textured for enhanced wet and dry gripping. Glove attributes: Material: Low modulus natural latex.Type: Non-sterile.Shape: Ambidextrous.Glove Interior: Powder-free.Glove Exterior: Textured. S...
  • Universal Camshaft Pulley Holder
    Universal Camshaft Pulley Holder
    Manufacturers Part #: 96800
    Your Price: $56.46
    This wrench is designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. For use with many OHC cam engines.Very useful on many asian import engines, especially transverse mounted V6 motors such as the Nissan VG30 in Maximas, as well as the Toyota 3VZFE and IMZFE used in Camrys.The rear pulleys on these models are in very close proximity to the shock tower making removal and replacemen...
  • AST 09228-06501 Toyota / Lexus / Scion Oil Filter Wrench - 64mm
    AST 09228-06501 Toyota / Lexus / Scion Oil Filter Wrench - 64mm
    Manufacturers Part #: TOY640
    Included in the TOY 300 Kit. 64mm with 14 flats. Use in conjunction with a 24mm or 15/16" socket. Comparable to Toyota Tool number 09228-06501 and 09228-06500-02. Made of Aluminum. Made in the U.S.A. Applications: Lexus Models: Lexus - CT 200h 2011 - 2013Lexus - ES 350 2007 - 2013Lexus - GS 300 2006 - 2006Lexus - GS 350 2007 - 2011Lexus - GS 450h 2007 - 2011Lexus - GS 460 2008 - 2011Lexus - GX 460 2010 - 2013Lexus - HS 250h 2010 - 2013Lexus - ...

Customers Also Shopped For:

  • Harmonic Damper Pulley Holding Tool - Lexus & Toyota
    Harmonic Damper Pulley Holding Tool - Lexus & Toyota
    Manufacturers Part #: 64300
    Your Price: $63.52
    Lexus 1990 and later: 3.0L L6, 3.0L V6, 4.0L V8, 4.7L V8Toyota 1996 and later: 3.3L V6, 4.0L V6, 4.7L V8 .Allows the technician to hold the pulley stationary for center bolt removal and installation.240 ft-lbsightening spec for center bolt makes this tool essential for pulley removal and installation. (Refer to factory specs for proper bolt installation and torque setting).Patent Pending. Schley Products 64300 Lexus & Toyota Harmonic Damper Pull...
  • Locking Chain Clamp 18 Inch / 455 mm
    Locking Chain Clamp 18 Inch / 455 mm
    Manufacturers Part #: 20R
    Your Price: $23.48
    Chain holds and locks around any shape or sizeIdeal for awkward shape piecesTurn screw to adjust pressure and fit work. Stays adjusted for repetitive useConstructed of high-grade heat-treated alloy steel for maximum toughness and durabilityClassic trigger release designed to provide maximum locking forceChain length - 18"/455mm.Size - 9"/225mmHolds and locks around any shape, any size.18"/455mm chain, extension chain available. Irwin 27ZR Vise-G...
  • 1/2 In Dr Impact Socket, 6 Pt, Deep, 11/16 In
    1/2 In Dr Impact Socket, 6 Pt, Deep, 11/16 In
    Manufacturers Part #: 222D
    Your Price: $5.88
    1/2" Drive Impact Socket, 6 Point, Deep, Size 11/16" Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. ...
  • 1/4 In Drive 6 Pt Metric Flex Socket - 5mm
    1/4 In Drive 6 Pt Metric Flex Socket - 5mm
    Manufacturers Part #: 43805
    1/4" Drive 6-Pt Flex Metric Socket Hex Size - 5mmDiameter - 0.50"Length - 1.20"Made in the U.S.A., featuring quality workmanship and value.The patented SureGrip(R) hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Improved Access - Vehicles and industrial equipment are using small...
  • Bumper Coater - Charcoal Metallic Aerosol
    Bumper Coater - Charcoal Metallic Aerosol
    Manufacturers Part #: 39273
    Your Price: $13.35
    Currently available in 27 OEM colors to match most contrasting domestic and foreign bumpers. Sem Products 39273 Charcoal Metallic Aerosol Bumper Coater ...
  • Clutch Alignment Tool - Volkswagen
    Clutch Alignment Tool - Volkswagen
    Manufacturers Part #: 81251
    Your Price: $8.75
    This clutch alignment tool has been designed to center the clutch disk with the pressure plate when it is installed. If this is not done accurately the gearbox mainshaft will not be able to locate the splines of the clutch disk hub, and it will be impossible to fit the gearbox to the engine. The use of this tool is a must whenever changing a clutch. It is made of glass filled nylon for strength and held to exact tolerances for an ideal fit. ...

Current Reviews: 0