Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Tire Tools, Wheels & Suspension > Axle Nut Sockets > 3/4 Inch Drive 6 Pt Bearing Locknut Socket 4 In

3/4 Inch Drive 6 Pt Bearing Locknut Socket 4 Inch

3/4 Inch Drive 6 Pt Bearing Locknut Socket 4 Inch

Features:

  • Truck wheel bearing locknut socket has 3/4" square drive opening.
  • Permits the use of an extension & torque wrench to tighten the locknut as required.
  • Locknut removal & installation is simple, even when wide rim wheels are involved.
  • A long extension may be attached to the socket to provide the necessary clearance.
  • Socket is made of high-strength steel.
  • Opening resists "rounding out."

OTC 1914 3/4" Drive 6 Point 4" Bearing Locknut Socket

  • Shipping Weight: 3lbs
  • Manufactured by: OTC Tools and Equipment
  • Toolsource #: 62852
  • Manufacturers Part #: 1914
  • Also Known As: OT1914, OTC-1914, OTC1914

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$42.13

Customers Also Purchased:

Customers Also Shopped For:

  • 3/4 In Dr Metric 6 Pt Truck Wheel Bearing Locknut Socket - 71mm
    3/4 In Dr Metric 6 Pt Truck Wheel Bearing Locknut Socket - 71mm
    Manufacturers Part #: 1954M
    Your Price: $90.33
    Wheel bearing locknuts are easy to remove or install with these specially designed sockets.They're made of high strength steel and resist rounding out.Measure from flat to flat to determine size of locknut, then consult chart to select a socket.Fits special "rounded" hex nut found on Dana axles of some Ford trucks.Depth of locknut sockets is 5".Image is representative and may not depict the actual product. NOTE: Sockets are designed for use with...
  • 3/4 Inch Drive 6 Pt Bearing Locknut Socket 3 3/4 Inch
    3/4 Inch Drive 6 Pt Bearing Locknut Socket 3 3/4 Inch
    Manufacturers Part #: 1926
    Your Price: $35.73
    Features: Truck wheel bearing locknut socket has 3/4" square drive opening. Permits the use of an extension & torque wrench to tighten the locknut as required. Locknut removal & installation is simple, even when wide rim wheels are involved. A long extension may be attached to the socket to provide the necessary clearance. Socket is made of high-strength steel. Opening resists "rounding out." OTC 1926 3/4" Drive 6 Point 3 3/4" Bearing Lo...
  • OTC 9850 6 Point Truck Wheel Bearing Locknut Sockets - 21-Pc
    OTC 9850 6 Point Truck Wheel Bearing Locknut Sockets - 21-Pc
    Manufacturers Part #: 9850
    Your Price: $927.57
    19 Locknut Sockets from 2-3/32" to 5-1/4". 1 Locknut Socket 2-9/16" rounded. 1 Locknut Socket 2-3/8" rounded. Includes display panel. Weight: 54 lbs., 7oz. OTC 9850 21-Pc 6-Pt Truck Wheel Bearing Locknut Sockets ...
  • Hub Removal Kit for Dodge
    Hub Removal Kit for Dodge
    Manufacturers Part #: 38210
    Your Price: $34.57
    38210 Hub Removal Kit for Dodge Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge Vehicles.   Tool drives against loosened retaining bolts to separate assembly. Prevents damage to the knuckle and complete hub assembly. Tool drives on the bolt flange, so the head of the retaining bolt is not destroyed. Kit contains 39300 for older, smaller applications and 39250 for 2003 and newer 4-wheel drive 3/4 ton and 1 ...
  • Pneumatic U-Joint Driver
    Pneumatic U-Joint Driver
    Manufacturers Part #: 18980
    Your Price: $23.25
    Quickly removes the u-joint cap from the drive shaft on most rear wheel drive vehicles.Use the driver with an air hammer to remove u-joint caps up to 1-5/16" diameter.Prevents damage to drive shaft and axle shaft ears, when presses or chisels are used.On some vehicles the u-joint is retained with plastic from the factory.The plastic must be removed prior to driving out the u-joint caps.Shipping Weight: 1 lb. 4 oz. Lisle 18980 Pneumatic U-Joint D...
  • Bearing Locknut Socket - 4-7/8 In - 6 Pt
    Bearing Locknut Socket - 4-7/8 In - 6 Pt
    Manufacturers Part #: 1918
    Your Price: $40.66
    OTC 1918 6 Point Bearing Locknut Socket - 4-7/8" Features: Truck wheel bearing locknut socket has 3/4" square drive opening.Permits the use of an extension & torque wrench to tighten the locknut as required.Locknut removal & installation is simple, even when wide rim wheels are involved.A long extension may be attached to the socket to provide the necessary clearance.Socket is made of high-strength steel.Opening resists "rounding out." ...

Current Reviews: 0