A/C Oil & Dye Injector R12 & R134a 2 oz. - FJC

FJC | A/C Oil & Dye Injector R12 & R134a 2 oz. | 2732

Key Features:

• Hand turn
• 2 oz refillable injector
• For oil or dye
• Add oil or UV dye without adding refrigerant

Applications:

• Used to add oil or UV dye to automotive A/C systems
• Can be used on R12 or R134a systems

Benefits:

• Allows you to add oil or dye without having to evacuate the system
• Reduces the risk of contamination
• Improves the performance of your A/C system

Instructions for Use:

1. Turn off the A/C system and allow it to cool down.
2. Remove the service valve cover from the low side of the A/C system.
3. Connect the oil injector to the service valve.
4. Squeeze the trigger on the injector to inject the oil or dye into the system.
5. Reinstall the service valve cover.
6. Turn on the A/C system and allow it to run for a few minutes to circulate the oil or dye throughout the system.

Troubleshooting:

If the oil or dye does not appear to be flowing into the system, check to make sure that the injector is properly connected to the service valve. If the injector is connected properly and the oil or dye is still not flowing, there may be a blockage in the system. In this case, you will need to have the system serviced by a qualified technician.

Cautions:

• Do not use this product if the A/C system is under pressure.
• Do not use this product if the A/C system has been opened.
• Do not use this product if the A/C system is leaking.
• Do not use this product if the A/C system is contaminated.

For more information, please contact us at