Free shipping on orders overFree shipping over $250 Lower 48 states and DC. Excludes freight and oversize.

Extractor for Clamping Bolt, Audi A4 / VW Passat - Gedore

Part #: KL-0250-40

Features and Benefits:

  • Suitable for Audi A4 (until year ?00) / VW Passat front axle (until year ?05).
  • For unscrewing the upper clamping screw and the pivot pins from the steering knuckle
  • Suitable for the left and right wheel suspension
  • No damage to the steering knuckles, pivot pins and wishbone beam
  • High time saving

  • Removing the upper clamping bolt and the two pivot pins from the steering knuckle has always presented technicians with problems, especially when components are heavily corroded in place. Not only is the usual technique using hammer, welding torch, angle grinder and drift time-consuming and arduous, but there is also the risk of damaging steering knuckles, pivot pins and wishbone struts. The extractor KL-0250-40 with its proper pressure unit enables the quick and professional extraction of the hex clamping bolt and pivot pins. The tool is suitable for both right-hand and left-hand wheel suspensions. Application example: Mount tool with pressure unit to steering knuckle (with pressure drift I inserted). Drive hex nut by means of an impact wrench and push back the hex clamping bolt. The loosening process takes place with a loid noise. Extract the hex clamping bolt with the pressure unit in 3 working stages. For this, insert the pressure drifts II + III one after another. Pull out the hex clamping bolt completely. In case it is still not possible to extract the entire hex clamping bolt, use the supplement pressure drift set KL-0250-402 to press it out completey. Remove the hex nut. Completely remove the pressure drift so that the clamping bore is clear. Using the pressure spindle, push out both pivot pins from the clamping bore. The tool can be used for the left and the right wheel suspension. The method with hammer, welding torch, angle grinder and mandrel is not only very time-consuming and exhausting but there is also a

Special Order Contact For Details

$768.40

Free shipping on orders over $250
Lower 48 states and DC. Excludes freight and oversize items.
Add to Cart:
  • (image for) Gedore
    Other products
    Gedore Homepage
  • Model: 417327
  • Shipping Weight: 5.65lbs
  • UPC: 4046459029861
  • Manufacturers Part #: KL-0250-40
  • Manufactured by: Gedore
  • Also Known As: GEDKL-0250-40

This product was added to our catalog on Thursday 06 March, 2025.

Similar Products

(image for) Pulley Seal Installer VW Passat, Audi A4, A6, A8
Pulley Seal Installer VW Passat, Audi A4, A6, A8
Baum Tools 3202
Your Price: $106.59
List Price: $112.2
5% off
(image for) Cam Lock Clamp VW Audi
Cam Lock Clamp VW Audi
Assenmacher Specialty Tools T40070
Your Price: $188.96
List Price: $201
6% off
(image for) Ball joint extractor with lever transmission for passenger car
Ball joint extractor with lever transmission for passenger car
Kukko Quality Tools Inc 129-4-30
Your Price: $464.40
(image for) KL-0250-43 KB
KL-0250-43 KB
Gedore
Your Price: $736.95
(image for) KL-0186-80 K
KL-0186-80 K
Gedore
Your Price: $1,120.30
(image for) KL-0186-14 KB
KL-0186-14 KB
Gedore
Your Price: $1,495.15
(image for) KL-0165-3 KA
KL-0165-3 KA
Gedore
Your Price: $944.52
List Price: $1049.46
10% off
(image for) KL-0146-20
KL-0146-20
Gedore
Your Price: $747.99
List Price: $831.1
10% off
(image for) Locking Tool Set, VW (1.2 - 2.0 TDI)
Locking Tool Set, VW (1.2 - 2.0 TDI)
Gedore KL-0280-702K
Your Price: $651.92
(image for) Gedore Locking Tool Set, VW (1.8, 2.0 TFSI / TSI)
Gedore Locking Tool Set, VW (1.8, 2.0 TFSI / TSI)
Gedore KL-0280-763K
Your Price: $853.16
(image for) Locking Tool Set, VW (1.6, 2.0 TDI)
Locking Tool Set, VW (1.6, 2.0 TDI)
Gedore KL-0280-706 KA
Your Price: $249.90
(image for) Locking Tool Set, VW-Audi
Locking Tool Set, VW-Audi
Gedore KL-0280-602 KC
Your Price: $286.45