Air Tool Oil and Lubrication
Pneumatic tools need regular oil to keep vanes, motors and hammer mechanisms moving freely and to limit rust from moisture in the air line. This category holds air tool oil in several sizes, winter grade lubricant for cold shops, grease for impact wrench mechanisms, and in-line tool oilers that thread in at the tool and meter oil into the air stream. Auto repair shops, tire shops, body shops and industrial users with many air tools keep oil on every bench, since a dry tool loses power and wears faster.
Oiling by hand or in-line
The simplest method is a few drops of air tool oil in the air inlet before use, then running the tool briefly to spread it. An in-line oiler threads between the hose and the tool and adds a small amount of oil with every use, which suits tools that run all day. Oilers are sized by thread and drive, so match them to the tool; product names here cover tools from 1/4 and 3/8 in. drive up to 3/4 and 1 in. drive.
Choosing the right product
Use oil made for air tools rather than motor oil, which can gum up vanes and seals. Winter grade oil helps in unheated shops. Impact mechanisms that call for grease need it applied through the grease port, as the tool manual directs.
Brands here include Ingersoll Rand, Blaster, Marvel, S&G Tool Aid and Coilhose. Air filters, regulators and dryers, air hoses and couplers and fittings are in the neighboring Air Tool Accessories categories.
















































.jpeg)



Follow us on social media