Air Chipping Hammer, 2" Stroke - Ingersoll Rand

Ingersoll Rand W2A1 Air Chipping Hammer, 2" Stroke

The Ingersoll Rand W2A1 is a W Series air chipping hammer, sold as the tool only, with a 2 in. stroke and 1.13 in. bore that delivers 2,300 blows per minute. It uses 28 cfm at 90 psi through a 3/8 in. NPT inlet and needs at least a 1/2 in. hose.

Key Features

• 2 in. Stroke, 2,300 BPM: A 2 in. stroke and 1.13 in. bore drive 2,300 blows per minute.
• Threaded Barrel, Long Nozzle: The front end has a threaded barrel and a long nozzle that lets the bit rotate.
• Swan Neck Handle: The swan neck handle has an outside trigger, and the exhaust exits at the side and can be adjusted.
• Diecast Aluminum Housing: The housing is diecast aluminum and the piston is replaceable.
• Air Requirements: Uses 28 cfm at 90 psi through a 3/8 in. NPT inlet on a minimum 1/2 in. hose.

Applications

Light demolition, metal removal, form stripping, and chipping, cutting, chiseling and breaking hardened materials.

Specifications

• Manufacturer: Ingersoll Rand
• Model: W2A1
• Type: W Series air chipping hammer, tool only
• Stroke: 2 in. (51 mm)
• Bore: 1.13 in.
• Blows per Minute: 2,300
• Air Consumption: 28 cfm
• Air Pressure: 90 psi
• Air Inlet: 3/8 in. NPT
• Minimum Hose Size: 1/2 in.
• Overall Length: 16.38 in. (416 mm) without accessory
• Barrel: Threaded
• Handle and Throttle: Swan neck handle with outside trigger
• Exhaust: Side, adjustable
• Construction: Diecast aluminum housing; replaceable piston; long nozzle lets the bit rotate
• Stated Uses: Light demolition, metal removal, form stripping
• Stated Uses: Chipping, cutting, chiseling and breaking hardened materials