Menu

c. Econo-Clean Coolant Filtration Unit - Robinair

Part #: 75275

"Econo-Clean" Coolant Filtration Unit
  • Economy model filters impurities so coolant can be reused.
  • The 75275 is a compact, economical unit for filtering contaminants and reinhibiting used coolant.
  • It is designed strictly for on-vehicle filtration, removing the coolant from the system, restoring it to "like new" condition, and returning it to the vehicle.
  • The entire filtration process takes less than half an hour and there`s no need to wait for a hot engine to cool down.
  • The cooling system is accessed through the upper radiator hose, so there`s no need to cut hoses. The connections actually form a closed loop, so coolant is pumped out of the vehicle and through the filters, mixed with reinhibitor, and returned to the vehicle.
  • To add reinhibitor, just pour one bottle (two are needed if the system is over 16 quarts) into the sink - it`s added with no mess, no measuring and no calculations. A sampling valve on the front panel makes it easy to draw off a sample to test the coolant`s freeze point, pH and reserve alkalinity.
  • Coolant passes through a 20 micron filter, then a 5 micron filter to remove contaminants and particulates.
  • Less than 3` high with a footprint of just 14" x 14", it can be easily stored. With large wheels and single handle, it moves around easily.


  • DIMENSIONS - 34"H x 14" W x 14" D (85.1 cm x 35.6 cm x 34.3 cm).
  • WEIGHT - 45 pounds (20.4 kg).
  • POWER SOURCE - Compressed Air 50 psi (3.27 bar) at 3 cfm for minimum flow, 125 psi (2.17 bar) at 7 cfm for maximum flow.


  • Recommended Alternatives

    This product was added to our catalog on Thursday 15 February, 2007.