What are the benefits of using a 1/4" drive electronic torque wrench compared to a mechanical one?

Electronic torque wrenches offer several advantages over traditional mechanical (click-type) wrenches. They typically provide a digital display for precise torque readings, eliminating guesswork and reducing the risk of over- or under-tightening. Many models offer multiple units of measure (e.g., ft-lb, Nm, in-lb) and can store torque values for auditing purposes. Some, like certain models from ACDelco, also feature angle measurement, allowing you to tighten fasteners to a specific torque and angle, which is crucial for many modern automotive applications. While mechanical wrenches are durable and simpler, electronic wrenches offer greater accuracy and features for critical torque applications.

What is 'peak' and 'track' mode on a 1/4" drive electronic torque wrench, and when should I use each?

Electronic torque wrenches often have 'peak' and 'track' modes to assist with different tightening techniques. 'Track' mode displays the real-time torque value as you apply force, allowing you to monitor the torque as you tighten a fastener. This is useful for achieving a smooth, consistent torque. 'Peak' mode captures and displays the highest torque value reached during tightening. Use peak mode when you need to know the maximum torque applied, especially in situations where you can't directly observe the display while tightening. Some higher-end models may also offer an 'angle' mode for torque-and-angle tightening.

Can I use a 1/4" drive electronic torque wrench on lug nuts?

While a 1/4" drive electronic torque wrench offers precision, it's generally not suitable for tightening lug nuts. Lug nuts typically require much higher torque values than a 1/4" drive wrench can provide. Attempting to use a 1/4" drive wrench on lug nuts could damage the wrench or result in inaccurate torque application. For lug nuts, you'll generally need a 1/2" drive torque wrench with a higher torque range. Always refer to the vehicle manufacturer's specifications for the correct lug nut torque and use a torque wrench with an appropriate range.

What is the typical torque range for a 1/4" drive electronic torque wrench?

1/4" drive electronic torque wrenches are designed for lower torque applications, so their range is typically lower than larger drive sizes. You'll commonly find 1/4" drive electronic torque wrenches with a range of a few inch-pounds up to around 250 inch-pounds or roughly 20 foot-pounds. Always check the specific torque range of the wrench before use to ensure it's appropriate for the fastener you're working on. Exceeding the wrench's maximum torque capacity can damage the tool and compromise accuracy.

How often should I calibrate my 1/4" drive electronic torque wrench?

Regular calibration is crucial for maintaining the accuracy of your electronic torque wrench. For professional use, it's generally recommended to calibrate your wrench every 5,000 cycles or at least once a year, whichever comes first. If the wrench is used frequently or subjected to harsh conditions, more frequent calibration may be necessary. For infrequent DIY use, consider calibrating every two years. Always follow the manufacturer's recommendations for calibration frequency and procedures.

What features should I look for in a 1/4" drive electronic torque wrench for automotive work?

For automotive work, look for a 1/4" drive electronic torque wrench with a clear digital display, multiple units of measure (Nm, in-lb, ft-lb), and audible and visual alerts to indicate when the target torque is reached. A durable housing is also important for withstanding shop environments. Some models also offer angle measurement capabilities, which are increasingly important for modern automotive fasteners. Features like a comfortable grip and a long battery life can also enhance usability.

Are there any precautions I should take when storing my 1/4" drive electronic torque wrench?

Proper storage is essential for prolonging the life and accuracy of your electronic torque wrench. Always store the wrench in a clean, dry environment away from extreme temperatures and humidity. Release the tension on the wrench to prevent damage to the internal mechanism. Remove the batteries if you plan to store the wrench for an extended period to prevent corrosion. Store the wrench in its case or a protective pouch to prevent dust and debris from entering the mechanism. Avoid dropping or subjecting the wrench to impacts, as this can affect its calibration.

What does 'torque accuracy' mean for a 1/4" drive electronic torque wrench, and how important is it?

Torque accuracy refers to how closely the torque value displayed by the wrench matches the actual torque applied to the fastener. It's typically expressed as a percentage (e.g., ±2% or ±4%). Accuracy is extremely important, especially for critical automotive applications where fasteners must be tightened to precise specifications to ensure proper component function and prevent damage. A more accurate wrench reduces the risk of over- or under-tightening, which can lead to component failure or safety hazards. Always choose a torque wrench with a specified accuracy that meets the requirements of your application.

Search

Manufacturers [more]

ARM313-2A 1/4" DIGITAL ANGLE TORQUE WRENCH (1.11-2

Name: ARM313-2A 1/4" DIGITAL ANGLE TORQUE WRENCH (1.11-2
Brand: ACDelco Tools
SKU: 233891
Price: 239.35 USD
Availability: Discontinued
Rating: 3 (1 reviews)

larger image

The search results provide comprehensive information about the ACDelco ARM313-2A. I can now populate the sections with accurate and specific details.

Information Extracted:

Model Number: ARM313-2A
Manufacturer: ACDelco Tools
Drive Size: 1/4 inch
Torque Range: 1.11 - 22.12 ft-lbs or 1.5 - 30 Nm
Accuracy: Clockwise ±1.5%; Counter-clockwise ±2.5% (from 20% to max torque)
Measurement Units: Kg-cm, N-m, In-lbs., Ft-lbs.
Measurement Modes: Torque and Angle. Standard functions: torque setting, measurement setting, mode setting. Peak or Trace modes.
Direction: Operates in both clockwise and counter-clockwise directions.
Display: LCD backlight display that shows reached torque, battery life, measurement modes.
Alerts: Audible (buzzer), visual (LED flashing - green & red), and sensory (vibration) warnings for under torque or overload.
Memory: 30 data sets of memory capacity.
Angle Measurement: Up to 720 degrees maximum angle measure.
Auto Shut-Off: After 2 minutes of no use.
Operating Temperature: 14°F to 140°F (-10°C to 60°C).
Battery: 2 x AA batteries (not included). Battery life: 110 Hours.
Weight: 1.68 lbs (0.76 kg). (The provided input was 0 lbs, so I will use the accurate weight).
Length: 16-1/8" (410 mm). (The provided input was 0x0x0, so I will use the accurate dimensions).
Grip: Anti-slip soft grip.
Calibration: ISO 6789 Calibrated.

Now I can construct the detailed product description. I will ensure to cite appropriately.

Specifications

Model Number: ARM313-2A
Manufacturer: ACDelco Tools
Drive Size: 1/4 inch Square
Torque Range: 1.11 - 22.12 ft-lbs (1.5 - 30 Nm)
Accuracy: Clockwise ±1.5%; Counter-clockwise ±2.5% (applies from 20% to maximum torque)
Measurement Units: Kg-cm, N-m, In-lbs., Ft-lbs.
Operating Direction: Clockwise and counter-clockwise
Gear Teeth: 72
Length: 16-1/8 inches (410 mm)
Weight: 1.68 lbs (0.76 kg)
Operating Temperature: 14°F to 140°F (-10°C to 60°C)
Battery: 2 x AA batteries (not included)
Battery Life: Approximately 110 hours
Auto Shut-Off: After 2 minutes of inactivity
Calibration: ISO 6789 Standards

Key Features

Digital Display: Features an LCD backlight display that clearly shows real-time torque values, battery life, and selected measurement modes.
Angle Measurement: Provides up to 720 degrees of maximum angle measurement for precise fastener tightening requirements.
Multiple Measurement Modes: Supports standard functions for torque setting, measurement setting, and mode setting, including easy setup for Peak or Trace modes.
Bi-Directional Operation: Accurately functions in both clockwise and counter-clockwise directions, enhancing versatility.
Audible, Visual, and Sensory Alerts: Equipped with a buzzer, LED flashing (green and red), and vibration warnings to indicate when target torque or angle is reached or if there is an overload.
Memory Function: Stores up to 30 data sets, allowing for convenient record-keeping and analysis.
Ergonomic Design: Features an anti-slip soft grip handle, promoting comfortable and secure operation during extended use.
Durable Construction: Built with high-quality materials, including a harden steel alloy body, for reliability and a longer lifespan in demanding work environments.

Applications

Automotive Maintenance and Repair: Ideal for critical engine assembly, transmission work, and chassis components where precise torque and angle specifications are essential.
Motorcycle and Bicycle Maintenance: Ensures accurate tightening of fasteners on delicate and high-performance components.
Industrial Assembly: Suitable for various assembly tasks requiring specific torque values to maintain product integrity and safety.
Electronics and Aerospace: Addresses the need for accurate fastener control in sensitive equipment to prevent damage or failure.
General Fastening Tasks: Provides reliability and precision for any application demanding adherence to strict torque and angle specifications.

Benefits

Enhanced Accuracy and Precision: Delivers highly accurate torque (±1.5% CW, ±2.5% CCW) and angle measurements, preventing the risks associated with under or over-tightening fasteners.
Increased Efficiency: Digital display, multiple measurement modes, and clear alerts streamline the tightening process, reducing errors and saving time during critical operations.
Improved Reliability and Safety: Ensures components are secured to manufacturer specifications, significantly reducing the likelihood of part failure, stripping threads, or loosening fasteners, thus enhancing overall operational safety.
Reduced Rework and Damage: Precise control minimizes the need for costly adjustments, repairs, or replacement of damaged components due to incorrect torque application.
Versatile Performance: The ability to operate in both directions and measure both torque and angle makes it a highly adaptable tool for a wide range of professional and industrial applications.
User-Friendly Experience: Features like the backlit LCD, anti-slip grip, and intuitive controls contribute to comfortable and straightforward operation, even in challenging conditions.

Other products
ACDelco Tools Homepage
Model: 233891
Manufacturers Part #: ARM313-2A
Manufactured by: ACDelco Tools
Also Known As: ACDARM313-2A, ACD-ARM313-2A