Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Cutting and Threading > Sharpeners > Edgemaker(R) Pro Knife Sharpen

Edgemaker(R) Pro Knife Sharpener

Edgemaker(R) Pro Knife Sharpener

Edgemaker(R) Pro Knife Sharpener

  • Grooved sharpening steels and finer honing steels.
  • Provides two-step sharpening for a keen edge.
  • Restores any blade.
  • Sharpens most knives in less then 1 minute, including serrated.
  • "Never lose it" orange handle.
  • The 4-Step Sharpening System is field tested and approved by the North American Fising Club (NAFC) and the North American Hunting Club (NAHC).

  • Shipping Weight: 0.3lbs
  • Manufactured by: Edgemaker
  • Toolsource #: 95295
  • Manufacturers Part #: 331
  • Also Known As: THE331

Special Order
Contact For Details

$15.62

Customers Also Purchased:

  • OPTIMAX Jr. Ultraviolet Lamp / Flashlight
    OPTIMAX Jr. Ultraviolet Lamp / Flashlight
    Manufacturers Part #: TP8640CS
    Your Price: $60.57
    100,000 hour LED bulb4 Hours run timeUses (3) AA batteries (included). Spectronics Tracerline TP8640CS OPTIMAX Jr. Ultraviolet Light ...
  • X-Citer Pro 2 UV Light
    X-Citer Pro 2 UV Light
    Manufacturers Part #: BSL832
    Bright Solutions BSL832 X-Citer Pro 2 UV Light The X-Citer Pro 2 uses patented technology to fluoresce even the smallest leaks.UV LED Leak Detection Lamp with 12 Bright LEDs.Includes X-Citer Pro 2 Lamp w/12 Bright LEDs, Battery Pack, 110 V Charger, 1 Pair Maxi-Brite Fluorescence-Enhancing Safety Goggles, Instructions. BrightCordlessRechargeableSoft Touch ...
  • 1/2 Inch Drive Torque-Rite Tire Shop Torque Wrench
    1/2 Inch Drive Torque-Rite Tire Shop Torque Wrench
    Manufacturers Part #: 3498
    This tool is specifically for checking wheel lug nuts to exact manufacturer recommended torque value.Use in addition to torque limiters to tighten lugs to precise manufacturer recommendations.Helps prevent the warpage of brake rotors caused by over torquing.New and improved steel lock ring with heavy duty lock mechanism.Tough "tire tread" robber cover on head, lock ring and handle provides cushioning effect to reduce operator fatigue and tool da...
  • Indexing Double Box Ratcheting Wrench Set 6-Pc
    Indexing Double Box Ratcheting Wrench Set 6-Pc
    Manufacturers Part #: 85490
    Features: Ratcheting productivity in places where the fastener is obstructed and/or there is little room to swing the wrench Reaching fasteners behind obstructions or around corners Double box XXL wrench with a lockable joint that allows the box ends to pivot from left to right Combine the benefits of a specialty obstruction wrench with the versatility of a GearBox ratcheting wrench Forged handle for heavy use Includes: No. 85480 8mm x 10mm Ind...
  • Deutsch Terminal Removal Tool Kit
    Deutsch Terminal Removal Tool Kit
    Manufacturers Part #: 483
    Your Price: $27.77
    Tools are designed to fit Deutsch HD10, HD20 and HD30 Series connectors plus Deutsch Jiffy Splices.Kit contains six tools to fit the following wire sizes: 4, 8, 12, 14, 16 and 20 gauge.Deutsch wire terminals have a special security collar that the connector tabs lock against.Tools are designed to slide over the wire in the rear of the connector to release the locking tabs.Deutsch terminals and connectors are found on Chrysler, GM, AGCO, John Dee...
  • Refrigerant and Oil Charge Can Tap Valve 3-in-1 Tool
    Refrigerant and Oil Charge Can Tap Valve 3-in-1 Tool
    Manufacturers Part #: 85530
    Your Price: $9.70
    Brass fitting with 1/4" flare fitting & 1/2" acme fitting. The new side entry can tap is like having three tools in one Unique design will work on all R134a (2-7/8"), R12 (2-1/2") and oil charge (2") cans The outlet port offers a 1/2" ACME and 1/2" FL fitting with an internal check valve to prevent system backflow The "pliers style" grip is easy to use and has a positive locking latch to insure secure engagemen...

Customers Also Shopped For:


Current Reviews: 0