Recently Added Products In
-
3/8"DR FLX ELEC TRQ WRN W/
Manufacturers Part #: 85078
Your Price: $247.38Includes Free Shipping• Torque wrench with angle has a range from 5 to 999 degrees • Accuracy of 2% CW, 3% CCW from 20 – 100% of range • 15° thin profile flex-head for better access • 72-tooth ratchet gear for 5° ratcheting arc • The electronic unit has (5) torque measurements (ft.-lb., in-lb., Nm, Kg-fm, Kg-fcm) • Features (10) pre-set regularly used torque settings • Target torque warning includes a tone, vibrating handle and backlit blue LED scree... -
PACE PROTECTIVE GLAZE
Manufacturers Part #: 133716
Your Price: $14.80• Beautifies and protects freshly painted surfaces • Allows surfaces to fully cure without causing solvent pop • Can also be used to heighten gloss on non-repaired vehicle areas, making it ideal for pre-delivery prep... -
**XWT07T/ BL1850B
Manufacturers Part #: XWT07TB5
Your Price: $523.63Includes Free Shipping• BL™ Motor delivers 780 ft.lbs. of fastening torque and 1,250 ft.lbs of breakaway torque • 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications • 3/4 anvil with friction ring and thru hole retention system for maximum productivity • Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up... -
XL CARBIDE SCRAPER SET
Manufacturers Part #: 268320
• Mueller’s gasket; corrosion and carbon scraper • Double edged blade • Extremely durable due to high quality carbide inserts • Works as a push or pull tool • Ergonomic hand grip • Removes burned-in corrosion on brakes, carbon on exhaust manifold, etc. • Extra-long!!! Total length of 11 in.... -
BANDIT USB HEADLAMP RED CL
Manufacturers Part #: 61705
Your Price: $19.93• Lightweight, low-profile, USB rechargeable headlamp • Ultra-bright white COB LED produces 180 Lumens on High and Flash, 35 Lumens on Low • Produces bright, evenly diffused light with less shadow than spot beams • Beam doesn't bounce • Floods work area with light; ideal for close-up tasks • USB rechargeable lithium polymer battery charges in approximately 2.5 hours • Conveniently charges via USB power source • Includes 5-inch Mic... -
MINI TAB FOR MEDIUM TRUCKS
Manufacturers Part #: MLTPRO
• Full Bi-directional Controls • Full System Access • DPF Resets & Regens • Injector Coding • Injector Cut Off • DPF Aftertreatment Leak Test & Reset Functions • EGR Reset on Medium Trucks • Turbo Charger Calibration & Activation (Required for Turbo Replacement) • Steering Angle Reset • VGT Electronic Actuator Installation & Calibration • Fan Override Test • Maintenance Reset • Cylinder Performance test • SCR Performan... -
LD KIT W UV LIGHT REFIL 2O
Manufacturers Part #: 56400
Your Price: $314.59Includes Free Shipping• 56200 “RAPTOR” Electronic Leak Detector • Refillable Dye Injector • Dye Injector Connection Hose W/R12 Adapter • 2 oz Bottle of Concentrated Universal Dye • UV Safety Glasses & Dye Cleaner... -
150FT ROLL ALUMINUM TAPE
Manufacturers Part #: DF-AT150
Your Price: $20.24• Used in welding plastic bumper in order to repair... -
M XC3401VRG ORBITAL POLISH
Manufacturers Part #: 890009
Your Price: $551.25Includes Free Shipping• 5/16” orbit for high efficiency • Forced rotation for fast correction • Each unit tested prior to shipment for reliable performance • Soft start, continuous speed control trigger, restart protection after power failure, over-load protection and temperature monitoring....
Featured Products
-
Trim Fastener & Molding Remover Set
Manufacturers Part #: 117
Your Price: $13.69FEATURES Set includes five different sizes and styles of tools that allow easy removal of trim fasteners moldings and wheel hubs. Tools are made of plastic to prevent damage to trim moldings alloy wheels or vehicle paint. Can be used on trim fasteners and moldings inside or outside the vehicle. ... -
High-Pressure Inflating Connection Schrader 1/8 In NPT Male
Manufacturers Part #: 556
Your Price: $26.30This high pressure inflating connection attaches securely by hand or wrench to the valve cap threads of high pressure valves. It can be fitted to gauging and inflating devices by a variety of methods. Various angles permit easy attachment to hard-to-reach valves. Specifications: Fits thread size: .305-32Air line connection: 1/8" NPT MaleMaximum pressure rating (PSIG): 3,000Configuration: Air line connection 90? to axis of valveRecommended Max. To... -
120 Volt AC Charger US w/Cord Set
Manufacturers Part #: 1020-027-US
Your Price: $56.64PowerPush by Meritool 1010-027-US - 120 Volt AC Charger US *This charger is only compatible with PowerPush battery 1010-013, will not work with battery 1010-003* ... -
Ford Diesel Fan Clutch Wrench - 6.9 , 7.3 & 7.3 L DIT
Manufacturers Part #: 3473
Your Price: $20.75KD 3473 Features: Use in conjunction with the Universal Pulley Holder #3471 to remove and replace thermostatic fan assemblies on Ford trucks with 6.9L, 7.3L and 7.3L DIT diesel engines. KD Tools 3473 Ford Diesel Fan Clutch Wrench - 6.9 , 7.3 & 7.3 L DIT ... -
Battery 14.4V NiMH
Manufacturers Part #: 1010-013
Your Price: $50.99(1) "Green" eco-friendly, non-hazardous battery, suitable for air travel. PowerPush by Meritool 1010-013 14.4v NiMH Battery *Only compatible with powerpush charger 1020-027,will not work with charger 1020-002*... -
Timing Chain Holders
Manufacturers Part #: 10200A
Your Price: $81.68Current Usage * 2011 (JC, JS, LC, LD, LX, RT, WD, WK) - Systems (9 -Engine, 3.6L) 2012 (JC, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2013 (DS, JC, JF, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2014 (DS, JC, JF, JK, JS, KL, LC, LD, LX, RT, VF, WD, WK) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L) *To minimize the tools necessary to service Chrysler Group vehicles, this usage infor... -
Crank Gear Installer/Seal Driver
Manufacturers Part #: J-5590
Your Price: $26.04Crank Gear Installer/Seal Driver J-5590 Tool Number: J-5590 Tool Name: Crank Gear Installer/Seal Driver Applications: 2.8,3.1,3.4L F, L, U Van, W, S/T Truck, 2.8, 3.1, 3.4L This tool is used to install the lower timing sprocket to the crank shaft. Kent-Moore KM J-5590 Crank Gear Installer/Seal Driver ... -
Kent-Moore PT-6400-C Liner Puller Assembly
Manufacturers Part #: KMPT-6400-C
Your Price: $904.49Includes Free ShippingFor Heavy-duty truck applications. Caterpillar and Cummins (except L-10 & C) and any wet liner from 3-7/8" to 6-1/4" bore up to 15" deep. Features: Caterpillar and Cummins (except L-10 & C) - fits all wet liners from 3-7/8" to 6-1/4" bores up to 15" deep Built to use with a heavy-duty impact wrench Fast, easy set-ups and operation Spring loaded feet automatically adjust to fit liner Reduces downtime for quick payback Rugged construc... -