Recently Added Products In
-
53 PC MSTR TORX BIT SOCKET
Manufacturers Part #: 5900A-PLUS
Your Price: $82.93• Updated 53-piece Master Torx Bit Socket Set plus special 24mm External Torx PLUS Socket (p/n 5932-24) required for Ford Super Duty pick-up beds starting model year 2017 • Socket kit includes various sizes of Torx, Torx PLUS, Tamper Resistant Torx, Bit Sockets and External Torx Sockets in 1/4, 3/8 and 1/2 square drive • Stored in a convenient hard plastic clamshell case for protection and organization. Not rated for use with impact tools ... -
PREM SXC CART PU GIRL GERT
Manufacturers Part #: 8057XTGERTIE
Your Price: $736.45Includes Free Shipping• Latching handles keep drawers secure when closed and prevent accidental opening • Newly designed bumper system protects vehicles from accidental contact damage • Heavy duty 18 gauge (1.2mm) steel construction • Full extension roller bearing drawer slides • Locking top with gas shocks to raise and support the lid • EVA foam liners in all drawers prevent nicks and surface scratches... -
**802/615/279P
Manufacturers Part #: 802BDL
Your Price: $159.03Includes Free Shipping• For use installing button head wheel studs • Patented installer pull the stud into the drive flange, or hub without damaging the threads • Assures correct installation of wheel studs • No more ruined studs or lug nuts • Will install wheel studs on most major vehicle platforms, domestic and foreign, including light trucks and SUV's • Includes installers, washer, spacer and corresponding rethreader dies • w/FREE Brake Caliper Press ... -
GLOW PLUG TIP REMOVAL KIT
Manufacturers Part #: 600300
• Set of tools for the extraction of the glow plug tip in the event of breakage or seizure inside the seat, otherwise impossible to remove • Suitable for glow plugs with thread: • M10x1 • M10x1.25 • M9x1 • M8x1... -
GUARD#10 CHIP PROTECTOR BL
Manufacturers Part #: UP0875
Your Price: $14.09• Sound dampening - ideal for body panels and inside engine compartments • Bonds directly to bare metal and prepared aluminum and galvanized • High build formulation covers weld marks and seams • Compatible with most waterborne or solvent based paint systems... -
36IN CURVED PRY BAR W/ CAP
Manufacturers Part #: 853-36
Your Price: $26.66• Exceeds ASME standards • Strike protection hard capped handles are ergonomically designed for comfort, secure grip, and durability • Tips are bent for ease of access • High carbon alloy steel is forged and heat treated for strength and durability • Black oxide finish for corrosion resistance • Lifetime warranty • Made in the U.S.A. • Individual sizes available: 12”, 17”, 25”, 31” & 36”... -
CAN LOW VOC SPRAY GUN CLNR
Manufacturers Part #: 26689
Your Price: $6.62•Helps reduce the use of cleaning solvents •Compatible for cleaning waterborne and solvent-based coatings •Aerosol cleaner is low VOC – less than 25 g/L (meets SCAQMD Rule 1171) •Designed for use on metal spray equipment or composite/plastic components •Excellent for cleaning spray gun equipment... -
R1234YF/PAG A/C INJECTION
Manufacturers Part #: TP-9824
• 1 – EZ-Ject™ dye injector assembly • 0.5 oz (15 ml) EZ-Ject™ R-1234yf/PAG A/C dye multi-dose cartridge, services up to 14 vehicles • 1 – R-1234yf Hose/coupler with purge fitting... -
RIVET NUT HOG-INSTALL REM
Manufacturers Part #: 9456
Your Price: $21.10• Designed to drill holes for and remove up to 30 different rivet nuts sizes and brands • For all sizes of rivet nuts from 6-32 & M3 to 1/2-13 & M12 • CNC machined M2 High Speed Steel bit features chamfered steps designed to shave down set rivet nuts • Includes toolbox magnet drill size chart of easy reference • 135 degree split point for starting holes in sheetmetal easier • 3.3 long (extends 2.6 past drill)...
Featured Products
-
Trim Fastener & Molding Remover Set
Manufacturers Part #: 117
Your Price: $13.69FEATURES Set includes five different sizes and styles of tools that allow easy removal of trim fasteners moldings and wheel hubs. Tools are made of plastic to prevent damage to trim moldings alloy wheels or vehicle paint. Can be used on trim fasteners and moldings inside or outside the vehicle. ... -
High-Pressure Inflating Connection Schrader 1/8 In NPT Male
Manufacturers Part #: 556
Your Price: $26.30This high pressure inflating connection attaches securely by hand or wrench to the valve cap threads of high pressure valves. It can be fitted to gauging and inflating devices by a variety of methods. Various angles permit easy attachment to hard-to-reach valves. Specifications: Fits thread size: .305-32Air line connection: 1/8" NPT MaleMaximum pressure rating (PSIG): 3,000Configuration: Air line connection 90? to axis of valveRecommended Max. To... -
120 Volt AC Charger US w/Cord Set
Manufacturers Part #: 1020-027-US
Your Price: $56.64PowerPush by Meritool 1010-027-US - 120 Volt AC Charger US *This charger is only compatible with PowerPush battery 1010-013, will not work with battery 1010-003* ... -
Ford Diesel Fan Clutch Wrench - 6.9 , 7.3 & 7.3 L DIT
Manufacturers Part #: 3473
Your Price: $20.75KD 3473 Features: Use in conjunction with the Universal Pulley Holder #3471 to remove and replace thermostatic fan assemblies on Ford trucks with 6.9L, 7.3L and 7.3L DIT diesel engines. KD Tools 3473 Ford Diesel Fan Clutch Wrench - 6.9 , 7.3 & 7.3 L DIT ... -
Battery 14.4V NiMH
Manufacturers Part #: 1010-013
Your Price: $50.99(1) "Green" eco-friendly, non-hazardous battery, suitable for air travel. PowerPush by Meritool 1010-013 14.4v NiMH Battery *Only compatible with powerpush charger 1020-027,will not work with charger 1020-002*... -
Timing Chain Holders
Manufacturers Part #: 10200A
Your Price: $81.68Current Usage * 2011 (JC, JS, LC, LD, LX, RT, WD, WK) - Systems (9 -Engine, 3.6L) 2012 (JC, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2013 (DS, JC, JF, JK, JS, LC, LD, LX, RT, WD, WK) - Systems (9 - Engine, 3.6L) 2014 (DS, JC, JF, JK, JS, KL, LC, LD, LX, RT, VF, WD, WK) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L) *To minimize the tools necessary to service Chrysler Group vehicles, this usage infor... -
Crank Gear Installer/Seal Driver
Manufacturers Part #: J-5590
Your Price: $26.04Crank Gear Installer/Seal Driver J-5590 Tool Number: J-5590 Tool Name: Crank Gear Installer/Seal Driver Applications: 2.8,3.1,3.4L F, L, U Van, W, S/T Truck, 2.8, 3.1, 3.4L This tool is used to install the lower timing sprocket to the crank shaft. Kent-Moore KM J-5590 Crank Gear Installer/Seal Driver ... -
Kent-Moore PT-6400-C Liner Puller Assembly
Manufacturers Part #: KMPT-6400-C
Your Price: $904.49Includes Free ShippingFor Heavy-duty truck applications. Caterpillar and Cummins (except L-10 & C) and any wet liner from 3-7/8" to 6-1/4" bore up to 15" deep. Features: Caterpillar and Cummins (except L-10 & C) - fits all wet liners from 3-7/8" to 6-1/4" bores up to 15" deep Built to use with a heavy-duty impact wrench Fast, easy set-ups and operation Spring loaded feet automatically adjust to fit liner Reduces downtime for quick payback Rugged construc... -