Rear Oil Seal Installer

Bosch Automotive Service Solutions J41479B Rear Oil Seal Installer.

Manufactured by: Kent-Moore
Toolsource #: 224671
Manufacturers Part #: J41479B
Also Known As: J41479B, KMJ41479B

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

$295.73

Customers Also Shopped For:

GM Rear Main Seal Installer

Manufacturers Part #: EN-48108
Your Price: $320.00Includes Free Shipping
Applications: 2.8L, 3.1L, 3.4L, 3.5L, 3.9L 60 degree V6 The rear main seal is shipped on a nylon disc to prevent damage to the inner lip. Removing the seal from this disc and installing on existing seal installer J-34686 can damage the inner seal lip. EN-48108 has a pilot that attaches to the back of the crankshaft, and the sael and disc assembly is placed onto this pilot.The installer portion of EN-48108 is placed over the pilot stud, and its b...
Add to Cart Details
Rear Oil Seal Installer

Manufacturers Part #: J-21426
Your Price: $152.53Includes Free Shipping
J-21426 is needed to properly install the axle seal and to help prevent damage to the outer surface of the seal during installation. Attempts to install the axle seal without the J-21426 may result in damage to the seal. Kent-Moore J-21426 Rear Oil Seal Installer ...
Add to Cart Details
Cam Lock Clamp VW Audi

Manufacturers Part #: T40070
Camshaft locking clamp used for setting timing in VW/Audi engines 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA and CBUA), 3.2L V6 4v (BKH), 4.2L V8 4v (BAR, BNS, BVJ, BYH and CAUA) and 5.2L V10 4v (BXA and BSM). 2 Cam Lock Clamps Used for locking camshafts when setting valve timing. Some applications: use with T 40069 or 3242 (check engine I.D. code) Made in USA Applicable to the following Models: Audi A4 (2005-2008), A4 Avant (2005-2008), A4 Cabriolet (20...
Add to Cart Details
3/8" DRIVE 1/8" HEX DRIVER SOCKET

Manufacturers Part #: 11-708
Your Price: $12.43
Socket Hex Bit 3/8" Drive 1/8" Features and Benefits: Made in the USA - Quality and AvailabilityBits are Manufactured to the Highest Tolerances and Specifications for Straightness, Concentricity, and Precise Tip Fit to the FastenerBits are Manufactured From High Alloy Steel Using the Most Up-To-Date Manufacturing Process and Heat Treat to Prevent Shattering and Premature Bit WearBits are Retained in the Bit Holder By a Set Screw That Locks Secur...
Add to Cart Details
**21352115QXPA/ 105-D2P

Manufacturers Part #: 21352115-R
Your Price: $877.15Includes Free Shipping
• Punish the toughest bolts with 780 ft-lbs. (2135QXPA) and 300 ft-lbs (2115QXPA) of max reverse torque. All powered by Ingersoll Rand’s finely tuned motor and twin-hammer impact mechanism. • 4 and 2.5 pounds • Ingersoll Rand’s Quiet Technology reduces the sound of the tool • One-year warranty • w/FREE 1/4 Mini Air Ratchet with Extended Head...
Add to Cart Details
Ford Crankshaft Rear Main Oil Seal Installer 303-178 / T82L-6701

Manufacturers Part #: 7786
Your Price: $136.08Includes Free Shipping
This installer is the most accurate way to ensure that the rear main seal is set to the correct depth on the crankshaft. The installer fits over the seal, and with the two bolts included, attaches to the engine crankshaft. By alternately tightening the bolts, the seal is pulled into place quickly, easily, and with no damage to the rear main seal. Works on: 1998 – 2002 Ford 2.5 DOHC engines 2000 – 2012 Ford 3.0 DOHC engines ...
Add to Cart Details