Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Misc > 3PC EURO/GM OIL SOCKET S

3PC EURO/GM OIL SOCKET SET

3PC EURO/GM OIL SOCKET SET
• A set of metric socket oil filter wrenches covering a broad range of applications on both domestic vehicles and imports, such as Audi, BMW, GM and VW • These durable and high-quality forged 3/8” drive sockets are designed to last • Set Includes: 27mm Socket Applications: Mercedes-Benz 1.8L I4, Cadillac STS 3.2L V6, 32mm Socket Applications: Saabs, 2.2L GM Ecotec, 36mm Socket Applications: BMW M52, M60, M62, M70 and M73 engines; M-B OM604, 605 and 606 engines, Audi and VW VR6 engines
  • Shipping Weight: 2lbs
  • Manufactured by: ATD Tools
  • Toolsource #: 169712
  • Manufacturers Part #: 5233
  • Also Known As: ATD-5233

Only 5 left in stock - order soon

$24.68

Customers Also Purchased:

  • GM and Chrysler Water Pump/Fan Clutch Pulley Holder Updated
    GM and Chrysler Water Pump/Fan Clutch Pulley Holder Updated
    Manufacturers Part #: 99800A
    Your Price: $56.46
    This specially designed tool is used with pressed on pulleys. These pulleys have holes instead of bolt heads for use in securing the pulley from rotating while removing or installing the fan clutch assembly. With the use of a 36mm open end wrench Part #88550, #93260 or #95210 the Technician can loosen and tighten the fan clutch on many 1999 and later GM trucks, vans and SUV`s, many 1998 and later Jeeps and many 1998 and later Dodge trucks, vans a...
  • Fan Clutch Wrench - Ford, GM, Mercedes
    Fan Clutch Wrench - Ford, GM, Mercedes
    Manufacturers Part #: 8036
    Replaces previous part number 8030; same tool, new part number. 36mm x 380mm long wrench for removal of fan clutch on Ford and GM vehicles with 36mm fan clutch nut and Mercedes-Benz M 112, 113 and later M119 motors. Used in conjunction with the 8005 for Ford and GM applications, used in conjunction with holder #6160 for Mercedes-Benz applications. Assenmacher Specialty Tools AST 8036 Fan Clutch Wrench - Ford, GM, Mercedes ...
  • GM/Chrysler Harmonic Damper Pulley Puller
    GM/Chrysler Harmonic Damper Pulley Puller
    Manufacturers Part #: 64900A
    Your Price: $83.98
    This tool has been upgraded with spring loaded "silver" legs that allow the technician to set leg position prior to installing on the harmonic damper pulley to aid in the removal of the harmonic damper pulleys found on many Chrysler, and G.M. engines. This pulley is hard to access and remove due to space limitations in and around the engine compartment. In most cases this compact tool eliminates the need of a technician to go through the time con...

Customers Also Shopped For:

  • 3/8 Inch Drive Oil Filter Socket for GM 2.2 Liter Ecotec
    3/8 Inch Drive Oil Filter Socket for GM 2.2 Liter Ecotec
    Manufacturers Part #: 14700
    Your Price: $6.73
    New lower profile to fit very low profile applications. Opens filter canister on 2.0L, 2.2L and 2.4L GM Ecotec engines.The low profile 1-1/4" (32mm) socket is specially designed for operating clearance, especially on Saturn applications.3/8" square drive.Not for use with an impact wrench. Lisle 14700 3/8" Drive Oil Filter Socket for GM 2.2 Liter ...
  • Low Profile Oil / Fuel Filter Socket Set - 3-Pc
    Low Profile Oil / Fuel Filter Socket Set - 3-Pc
    Manufacturers Part #: 14650
    Your Price: $20.01
    Set includes three low profile sockets for removing and installing both fuel filter and oil filter applications.Can be used for a variety of filter housing applications.All sockets are 3/8" drive. Set includes: 14500 - 35/36mm for Ford 6.0L Diesel Fuel and Oil Filter Housings, Mini Cooper and some BMW Oil Filter Housings, and Mack Truck Oil Filter Housing 14600 - 29mm (1-1/8") for Dodge Cummins Fuel Filter Housing 14700 - 32mm (1-1/4") for GM Eco...
  • Retainer, Camshaft Actuator
    Retainer, Camshaft Actuator
    Manufacturers Part #: EN48953
    Your Price: $209.27Includes Free Shipping
    Kent-Moore Tools Kent-Moore EN-48953  Retainer, Camshaft Actuator For GM / General Motors. The camshafts on the ECOTEC engines must be held when removing or installing the cam phaser bolts, or the timing chain may slip and not keep its relationship to the phasers. EN-48953 mounts to the front of the block and its tabs engage both cam phasers to hold them so the phaser bolts may be serviced. A pass-through hole on each side allows a soc...
  • Fan Clutch Wrench - Ford, GM, Mercedes
    Fan Clutch Wrench - Ford, GM, Mercedes
    Manufacturers Part #: 8036
    *this item has been discontinued
    Replaces previous part number 8030; same tool, new part number. 36mm x 380mm long wrench for removal of fan clutch on Ford and GM vehicles with 36mm fan clutch nut and Mercedes-Benz M 112, 113 and later M119 motors. Used in conjunction with the 8005 for Ford and GM applications, used in conjunction with holder #6160 for Mercedes-Benz applications. Assenmacher Specialty Tools AST 8036 Fan Clutch Wrench - Ford, GM, Mercedes ...
  • Tire Bead Wedge Pliers
    Tire Bead Wedge Pliers
    Manufacturers Part #: 5733
    Your Price: $53.66
    Tire Bead Wedge Pliers 5733 Features and Benefits: Keeps the tire in the wheel drop center Ease mounting and demounting of larger truck and agricultural tires Quick and easy universal clamping design Rugged rubber coated jaw to protect wheel finish These simple locking pliers clamp to the wheel rim while mounting or demounting a tire on a tire changer or on the floor. Lifetime warranty does not cover abuse OTC 5733   Tire Bead Wedge Pliers&...
  • Mechanics Tool Set 94 Pc
    Mechanics Tool Set 94 Pc
    Manufacturers Part #: 39070
    Your Price: $49.54
    There's nothing more important to a mechanic than tools. That's why they choose the legendary strength and reliability of CHANNELLOCK(R). Choose the set that's perfect for the work you do. Full polish, high carbon steel adds strength and durability to every tool.72 gear teeth require only 5-degrees to turn a fastener. Ease of use and high performance mean the Mechanic Tool Sets get the job accomplished without compromise.3/8" drive, 72 gear teeth...

Current Reviews: 0