Jumper Cables

Jumper Cables

Jumper cables are an essential tool for any automotive mechanic. They are used to connect the batteries of two vehicles in order to jump-start a dead battery. Jumper cables typically consist of two heavy-gauge copper cables, each with a red clamp on one end and a black clamp on the other. The red clamp is connected to the positive terminal of the good battery, and the black clamp is connected to the negative terminal of the dead battery. Once the cables are connected, the engine of the good vehicle is started and allowed to run for a few minutes. This will charge the battery of the dead vehicle, which can then be started.

Types of Jumper Cables

There are two main types of jumper cables:

  • AWG: The AWG (American Wire Gauge) rating of a jumper cable refers to the thickness of the cable. The higher the AWG number, the thinner the cable. Jumper cables with a higher AWG rating are less likely to overheat when in use.
  • Length: The length of a jumper cable is important for determining how far apart the two vehicles can be when they are connected. Longer jumper cables are more versatile, but they are also heavier and more difficult to handle.

How to Use Jumper Cables

To use jumper cables, follow these steps:

  1. Park the two vehicles close together, with the hoods open.
  2. Turn off the engines of both vehicles.
  3. Connect the red clamp of one jumper cable to the positive terminal of the good battery.
  4. Connect the black clamp of the same jumper cable to the unpainted metal part of the dead battery.
  5. Connect the red clamp of the other jumper cable to the positive terminal of the dead battery.
  6. Connect the black clamp of the other jumper cable to the negative terminal of the good battery.
  7. Start the engine of the good vehicle and allow it to run for a few minutes.
  8. Turn off the engine of the good vehicle.
  9. Disconnect the jumper cables in the reverse order that you connected them.

Safety Tips

When using jumper cables, it is important to follow these safety tips:

  • Do not connect the red clamp of a jumper cable to the negative terminal of a battery. This can cause a spark, which could start a fire.
  • Do not connect the black clamp of a jumper cable to the positive terminal of a battery. This can also cause a spark, which could start a fire.
  • Do not touch the clamps of the jumper cables while they are connected to the batteries. This could cause you to receive a shock.
  • Be careful not to drop the jumper cables onto the ground. This could damage the cables or cause a short circuit.

Conclusion

Jumper cables are an essential tool for any automotive mechanic. They are easy to use and can help you get your vehicle back on the road in no time.