|
The tool supports the replacement of TPMS sensors and the reprogramming of the car and turns the warning light off (if the vehicle engine management software has a built in relearn option). The tool actually decodes the sensor data which ensures that the correct TPMS is being read and that the tool is not fooled by RF transmissions from keyfobs or other sensors. The audit process allows the operator to display the data on screen but also to transfer it to a PC and print out an audit of the car and show the customer which TPMS is faulty and the nature of the fault. This is key to gaining the customer's confidence and agreement to pay for work to be done before the wheel is broken down. This tool also displays the replacement part number and service kit. It will also advise the user of the wrong TPMS has been fitted. This tool works with all cars on the market.
Wheelrite TECH300 Plus does everything the TECH300 does but uses its bright clear backlit graphical display and menu system to navigate and display its data. This lightweight compact diagnostic tool enables the technician to pre-selecting the vehicle make/model/year using its easy to use menu system. This leads to fast and accurate activations and decodes of TPMS and display of their data and any faults.
The tool is software updateable using a standard USB cable to a PC and simply by logging into the Customer Support Section of the Bartec USA website and entering account ID and password (obtained by registering your tool) and following the instructions. This is important as new TPMS are being fitted to new models at an increasing rate. This service is the best available from any tool manufacturer as Bartec are working in the car plants and hence have the TPMS updates up to a year before other manufacturers.
The tool comes in a moulded carrying case with a USB cable, magnet (for older model sensors), protective rubber boot, user guide and 9 volt battery.
Features: - The latest in TPMS Tool Technology with the most complete sensor coverage
- If a failed sensor is detected, the tool displays the replacement part number
- Sold as a complete kit, nothing else to purchase
- Bartec Rugged design
- Bright, high resolution display; easy to use menu system
- Make, Model, Year vehicle look up
- Decodes and displays sensor data including: Sensor ID, PSI, Battery State, Temperature
- Audit mode - easily download TPMS Sensor Data to a PC or laptop for printing
- Compact and ergonomic
- Runs on a 9 volt battery
- Dimensions: 6.0" x 2.25" x 1.25"
- Tool weight: 11.7 oz.
Bartec USA Wheelrite TECH300 Plus Tire Pressure Monitoring System Tool Kit
|
