Bend Pak HD-7PXW 7,000 Lb. Capacity Short Runway High Speed Super-Tall Four Post

Home » Toolsource » Shop Equipment and Supplies » Lifts » 106013
Short Runway High Speed Super-Tall Four Post Lift - 7,000 Lb Toolsource #106013 Manufacturers Part Number #HD-7PXW	$5,510.50

Click to enlarge

Bend Pak HD-7PXW 7,000 Lb. Capacity Short Runway High Speed Super-Tall Four Post Lift

BendPak's HD-7PXW is a super-tall, four-post, runway-style lift platform designed for professional use. A true lifting powerhouse, this high-speed lift will easily hoist 3-1/2 tons to heights exceeding 12'. Now you can finally store your high-profile trucks, vans and Winnebagos.

Dependable design - 4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

Dual-hub cable sheaves - Reduce stress and fatigue on the axles, sheaves and cables. Bend Pak uses dual-hub cable sheaves. When you buy BendPak, they throw in peace of mind as a free gift.

Multi-level locking positions - The HD-7PXW is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

Heavy-duty aircraft cable - Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! All lifting cables are fully enclosed within the lift structure itself.

Electric / hydraulic power system - Maintenance-free electric hydraulic power systems are incorporated into each lift for ultimate dependability, and all controls are conveniently located within close reach.

Large base plates - 12" x 12" base plates provide a solid foundation for the HD-7P.

Integrated design - Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

Longer approach ramps - These approach ramps were designed a little longer to help when loading low ground clearance vehicles.

Automatic safety locks - Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

Specifications:

Lifting capacity*: 7,000 lbs. / 3,175 kg
- *Max capacity / front axel: 3,500 lbs. / 1,588 kg
- *Max capacity / rear axel: 3,500 lbs. / 1,588 kg
Overall width: 116-3/4" / 2,965 mm
Outside length: 198" / 5,029 mm
Overall length: 224" / 5,690 mm
Height of columns: 158" / 4,011 mm
Runway min height: 4-1/2" / 114 mm
Max rise: 140" / 3,556 mm
Max lifting height: 145" / 3,685 mm
Width between posts: 106-3/4" / 2,711 mm
Runway width: 19" / 483 mm
Width between runways: 37-1/4" – 44" / 946 mm – 1,118 mm
Length of runways: 188" / 4,775 mm
Min wheelbase @ rated capacity: 135" / 3,429 mm
Min wheelbase @ 75% capacity: 115" / 2,921 mm
Min wheelbase @ 50% capacity: 95" / 2,413 mm
Min wheelbase @ 25% capacity: 80" / 2,032 mm
Locking positions: 30
Lock spacing: every 4" / 102 mm
Lifting time: 45 sec
Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 115 psi / 15 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

FREE FREIGHT* Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.

*An additional $40.00 will apply to all residential deliveries of heavy-equipment.

*For lift-gate service, add $135.00.

This product was added to our catalog on Thursday 05 November, 2009.

For more information, please visit this products webpage.

Toolsource

Search by Manufacturer

Search by Categories