Rocker Panel Coating, 23 ounce, Grey

Rocker Panel Coating, 23 ounce, Grey  8889



3M™ Rocker Panel Coating 08889 is a resilient coating designed to protect lower auto body panels from damage such as stone chipping. This coating is applied over primer coated panels and under top coats providing an additional layer of protection to the substrate. 3M™ Rocker Panel Coating 08889 is compatible with common automotive paints.
 
3M™ Rocker Panel Coating 08889 produces a textured finish which resists chipping, abrasion, rusting and weathering. Specifically developed to match OEM medium to coarse textures and produces a resilient under-the-paint coating to protect your vehicle year after year. Ideal for use on rocker panels, under bumpers and under-carriages to prevent exterior corrosion. 3M™ Rocker Panel Coating 08889 is fast drying, paintable, and offers excellent sound deadening properties. VOC Compliant in all 50 states.
 
DIRECTIONS FOR USE
 
Surface Preparation
 
Prime all bare metal surfaces with urethane or epoxy primer. Sand the primer using grade P320 - P500, clean the surface and mask accordingly.
 
NOTE 1: When repairing into factory applied chip guard coatings prime the sanded factory coating with epoxy primer to prevent “lifting” or “blistering”.
 
NOTE 2: Apply only to surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Acid etch primers should never be in direct contact with the coating.
 
Application And Sanding
 
Use at temperatures above 65°F (19°C), shake until agitator ball moves freely in the can.
 
Apply a light even coat to the surface from a distance of 10 - 12 inches (25 - 30 cm). Allow 5 minutes dry time before applying additional coats.
 
Apply additional coats to match desired texture, allowing adequate dry time between coats to avoid solvent bubbling. Texture can be varied by adjusting application speed, distance, and coating thickness. For best results, invert the can and spray to clear the actuator between coats and after use.
 
Finishing
 
Allow 1 hour dry time when 2 coats are applied (more dry time is needed if additional coats have been applied) prior to painting. Lightly scuff sand using grade P500 - P600 abrasive and apply top coats or primer/sealer (refer to paint manufacturers guidelines for paint application information).
 
VOC Information
 
VOC Compliant in all 50 states.
Please consult state and local regulations. CARB Category: Automotive Bumper and Trim Product. VOC Limit = 1.75 g O3/g product. This product: 1.63 g O3/g product.
 

Additional Product Information

3M Part Number
8889

UPC
51135088890

 Case Inner Pack
1 aerosol can

Brand
3M

Application
Rocker Panel Coating

Texture
Medium

Paintable
Yes

Paint Time
2 Hours

Dry Time
2 Hours

Color
Grey

3M Automotive  8889 Rocker Panel Coating, 23 ounce, Grey 
  • Model: 137333
  • Manufacturers Part #: 8889
  • Manufactured by: 3M Automotive
  • Also Known As: 3M-8889, 3M8889, MMM8889, MMM-8889

Only 6 left in stock - order soon

Inventory available from other suppliers, prices may be different

$56.85

Add to Cart:

This product was added to our catalog on Sunday 15 July, 2012.