Home » Toolsource » Lifting Equipment » Lifts » 99937

Rotary Lifts Low Rise Lift - 7,000 Lb Capacity
Toolsource #99937
Manufacturers Part Number #VLXS7

$2,882.97

Click to enlarge

$85 standard freight fee.

The VLXS7 is your solution for quick service operation on today's passenger cars and trucks up to 7,000 lbs. Tire and brake work can now be performed on a wider variety of vehicles, thanks to the newly designed pads and adapters, wider driveover capability and increased lifting capacity.

The pad and adapter combinations allow lifting of uni-body and frame contact undercarriages - reaching recommended manufacturers pick-up points on most vehicles on the road today.

Trucks and SUVs that require a wider drive-over capability will not be turned away. The VLXS7 has ramps and side drive-over areas to accommodate wider wheelbase vehicles.

The 7,000 lbs. capacity offers the ability to lift the heavier vehicles being sold today. The VLXS7 is truly the heavy-weight winner when comparing mid and low-rise lifts.

Drive-over ramps and side rails provide the width to support wider vehicles during approach.

Dual lifting cylinders provide the power required to lift a 10,000 lbs. vehicle.

Includes four heat-resistent non-slip pads which provide a great contact surface for adapters or vehicle pick-up points.

VLXS series VersaLifts come standard with a three-position wheel spotting dish for accurate spotting of vehicles.

7,000 and 10,000 lbs. capacity models are available.

VLXS7 Adapters - The 7,000 lb. capacity low-rise lift comes standard with a set of rubber blocks for quick access to lower profile and unibody frame vehicles. Blocks are 1 1/2" and 3" in height.

Specifications:

Rise High Step/Tall Pad: 24-3/4" (629mm)

Rise Short Pad: 23-1/4" (587mm)

Rise Flat: 21-3/4" (552mm)

Length Overall: 90-1/2" (2299mm)

Width Overall: 78-1/2" (1994mm)

Width Between Platforms: 22-3/4" (578mm)

Length of Platform: 51-1/4" (1299mm)

Length of Pad: 17" (432mm)

Outside Width of Platforms: 70-3/4" (1797mm)

Horizontal Movement (during rise): 16" (406mm)

Collapsed Height: 4" (102mm)

Locking Leg Heights: 13-3/8" (340mm); 17-3/8" (441mm); 21-3/8" (543mm)