Home » Toolsource » Lifting Equipment » Lifts » 99936

Rotary Lifts Low Rise Lift - 10,000 Lb Capacity
Toolsource #99936
Manufacturers Part Number #VLXS10

$4,760.08

Click to enlarge

$85 standard freight fee.

The VLXS10 is your solution for quick service operation on today's passenger cars and trucks up to 10,000 lbs. Tire and brake work can now be performed on a wider variety of vehicles, thanks to the newly designed pads and adapters, wider driveover capability and increased lifting capacity.

The pad and adapter combinations allow lifting of uni-body and frame contact undercarriages - reaching recommended manufacturers pick-up points on most vehicles on the road today.

Trucks and SUVs that require a wider drive-over capability will not be turned away. The VLXS10 has ramps and side drive-over areas to accommodate wider wheelbase vehicles.

The 10,000 lbs. capacity offers the ability to lift the heavier vehicles being sold today. The VLXS10 is truly the heavy-weight winner when comparing mid and low-rise lifts.

Drive-over ramps and side rails provide the width to support wider vehicles during approach.

Dual lifting cylinders provide the power required to lift a 10,000 lbs. vehicle.

Includes four heat-resistent non-slip pads which provide a great contact surface for adapters or vehicle pick-up points.

VLXS series VersaLifts come standard with a three-position wheel spotting dish for accurate spotting of vehicles.

7,000 and 10,000 lbs. capacity models are available.

VLXS10 Adapters - The new three-position adapters have rubber contact pads on three sides increasing the positioning capabilities. The height added by these adapters excels the versatility of the lift. The adapters can be laid flat for 4 5/16" (110mm) additional height or on the side for 6 5/16" (160mm). Achieve maximum extension by laying the adapter on end and allowing an additional 8 9/16" (218mm) of height. The VLXS10 also comes with a set of four 1 1/2" rubber block adapters for low-profile vehicles.

Specifications: