Morgan Mfg Inc. Morgan Mfg No. 9 Nokker Kit Slide Hammer MM9KIT

Home » Toolsource » Pullers » Slide Hammer » 105281
Morgan Mfg Inc. No. 9 Nokker Kit Slide Hammer Toolsource #105281 Manufacturers Part Number #9KIT	$163.72

Click to enlarge

9-lb. Slide Hammer taps lightly as a tack hammer or drives like a sledge.

Allows positive control of impact.

Includes:

BS-1 Thin Hook - Used on light duty applications where a narrow blade is needed.
BS-2 Chain Hook - Chain fits around metal parts where a regular hook might slip off or not reach. Can be used with vice grips to pull sheet metal edges.
BS-4 Caulking Blade - Used as a straight driver or deep reverse pulling when used with a BS-3 Return Coupler.
BS-5 Offset Blade - Malleable and can be used as a driver as well as deep reverse pulling with the BS-3 Return Coupler.
BS-7 Shaft - Impact ring is hot formed as an integral part of shaft. No welds to break or threads to loosen up. Thread cleaner on male end, coupler on female end. Both ends useable and adapt to all 4-ton bantam size jacks with 3/4" pipe thread fittings. This allows jack user to direct force to end he wants to move. Removable Handle.
BS-8, 9, 11 - Standard hooks for general purpose pulling.
BS-10 Screw Puller - Use with JR-56 & JR-57 Super Point as well as stock bolts and studs. Can also be used with a variety of hooks from the Jr. Nokker®

Morgan Mfg No. 9 Nokker® Kit Slide Hammer

This products was last updated on Friday 12 June, 2009

Toolsource