|
MACK V-MAC I Cartridge for Pro-Link Plus Mack Truck's V-MAC I engine control units and ITC (Injection Timing Control) / ACE (Advanced Combustion Engine)
This cartridge is for use with the Pro-Link scan tool for diagnosing Mack Trucks with V-MAC I engine control units. Simple menus allow technicians to easily navigate through a variety of diagnostic functions.
Key Features:- Access engine and trip data.
- Display data parameters and values in English or metric.
- Create custom data lists.
- Read and clear diagnostic fault codes.
- Reprogram idle speed.
- Program vehicle/customer data and password protected parameters -
- Speed settings and limits for road, cruise and PTO
- Idle shutdown options
- Engine protection shutdown options
- and many more.
- View vehicle data log for trip hours, miles and fuel used.
- Isolate intermittent problems in Snapshot mode recording and playback.
- Printer output for printing data and test results.
- Monitor switch status to the ECU
- Includes: Cartridge and manual.
Data List Parameters:
Active codes inactive codes; Auxillary input; Clutch engaged; Fuel shutoff; Parking brake/ service brake; Degrees above static; Timing; Road speed limit; Road speed limit status; Road speed MPH; Cruise control status; Cruise control set speed; Cruise control high set limit speed; Cruise control low set limit speed; Percent accelerator pedal position; Percent engine load; Engine oil pressure; Intake manifold temp; Barometric pressure; Engine coolant temp; Brake primary pressure; Brake secondary pressure; Clutch switch; ECU volts; Air inlet temp; Trip fuel/ fuel rate; Instantaneous miles per gallon; Average miles per gallon; Engine idle speed; Rated engine speed; Engine speed; Trip miles; Total vehicle hours; Total PTO hours; Total fuel used hours.
Reprogram the following parameters:- Vehicle data
- Customer data
- Speed settings
- Sensor shutdown
- Hand throttle
- Idle shutdown options
- Speed control options
- Idle speed adjustment with switches
- MPH sensor inactive fault detection
- Failed MPH sensor
- Fuel quantity limit
|
