|
The joint rate simulator adapter is used with electronic and pneumatic tools on CDI’s ETT (Electronic Torque Tester) and with CDI’s transducers. The joint rate adapter is placed on top of square drive of ETT or CDI’s transducers and secured with a set screw. An adapter bit is inserted into the power tool and is mated to top of the joint rate adapter. By stacking belleville washers in set patterns, the joint rate adapter can simulate soft, medium or hard joints. Tester Drive 1/4" Capacity: 50 in. lbs.Adapter Bit 1/4" Male Hex. x 3/16" Male Hex.Load Screw 1/4 - 28 x 1Joint Rate Simulator
|
