|
International MRD Electronic Engines Cartridge for Pro-Link Plus International DT444 and DT466 featuring a separate Injector Drive Unit (IDU) and Vehicle Personality Module (VPM)
This cartridge is for use with the Pro-Link scan tool for diagnosing International Trucks with DT 444 or DT466 electronic engine systems with a separate IDU and VPM. Simple menus allow technicians to easily navigate through a variety of diagnostic functions. It provides access to a full range of comprehensive OEM proprietary data and tests for maintaining top vehicle performance and keeping it on the road.
Key Features:- Access engine and trip data.
- Display data parameters and values in English or metric.
- Create custom data lists.
- Read and clear diagnostic fault codes.
- Perform ECU system self test diagnostics with engine off / engine running.
- Download and upload ECU calibrations with International via modem.
- Program vehicle/customer data and password protected parameters.
- Speed setting limits for road, cruise and PTO.
- Idle shutdown options.
- Engine protection shutdown options and many more.
- View vehicle data for trip hours, miles and fuel used.
- Isolate intermittent problems with Snapshot mode recording and playback.
- Printer output for printing data and test results.
ECU SYSTEM DIAGNOSTIC SELF TESTS- Active codes.
- Standard test -actuates relays and tests continuity.
- Injector test - fire each injector in order.
- Output state test - set outputs to a high or low state.
- VSS test - tests vehicle speed sensor.
- Tach buffer test - tachometer self test.
- Wiggle Test - audible test for isolating intermittent connections.
- Includes: Cartridge and manual.
Data List Parameters:
Rated horsepower; Rated RPM; Active/inactive codes; Engine hours; Miles; Fuel usage; Battery volts; Engine oil temperature; Ambient air; Coolant level and temperature; Idle set RPM; Accelerator; Engine RPM; Boost PSI; Barometric PSI; Torque limit; Engine load; Injector control; Fuel gallons/ hour; Transmission shaft RPM; Two speed axle; Vehicle speed MPH; MPH limit; Cruise control information; Engine oil PSI; PTO information; Remote variable; Remote APS; Retarder inhibit; VPM information; ECM version and checksum
Reprogram the following parameters:- Configuration options
- Start inhibit mode
- Retarder mode
- Exhaust back pressure
- Glow plug
- Cruise control
- Engine warning shutdown
- Event engine hours
- Fuel, hours, miles
- Idle shutdown
- Overtemp protection
- Passwords and audits
- PTO control
- Road speed limiting
- Torque tailoring
- Speed calibration
- VIN and engine serial number
- VPM revision data
For use with this item - sold separately: PN 108004 Pro-Linkr Plus; PN404024 6-pin Deutsch adapter; PN408028 9-pin Deutsch adapter; PN 401012 8-pin amp adapter.
|
