Mo-Clamp | 3 Inch Pull Plate for 800 Tac-N-Pull Clamp | 0803 | Break tack weld with a grinding cut-off wheel or cutting torch.
- Replacement adaptor plate for the #0800 Tac-N-Pull™ Clamp (not included).
- For hard to hold pulls.
- Tack weld one of the reusable plates, attach clamp and pull.
- Lifetime manufacturer warranty does not cover abuse.
Mo-Clamp 0803 3" Pull Plate
The Mo-Clamp 0803 3" Pull Plate is a replacement adaptor plate for the #0800 Tac-N-Pull™ Clamp. It is designed for use with hard to hold pulls. The plate is made of steel and has a zinc-plated finish. It is 3 inches in diameter and has a 1/2-inch hole in the center.
To use the Mo-Clamp 0803 3" Pull Plate, first tack weld one of the plates to the workpiece. Then, attach the #0800 Tac-N-Pull™ Clamp to the plate and tighten the clamp until the workpiece is securely held in place. Finally, apply force to the lever of the clamp to pull the workpiece.
The Mo-Clamp 0803 3" Pull Plate is a durable and reliable tool that can be used for a variety of applications. It is perfect for pulling tight bolts, nuts, and other fasteners. It is also a great tool for removing stuck parts.
Key Features:
- Replacement adaptor plate for the #0800 Tac-N-Pull™ Clamp
- For hard to hold pulls
- Tack weld one of the reusable plates, attach clamp and pull
- Lifetime manufacturer warranty does not cover abuse
Applications:
- Pulling tight bolts, nuts, and other fasteners
- Removing stuck parts
Benefits:
- Durable and reliable
- Versatile for a variety of applications
- Easy to use
07.jpg "Uni-Ram Corp."){kind=small}
