Ford Cam Positioning Crankshaft TDC Timing Pin - T97P-6000-A

  • Quick and accurate service of today`s late model valve trains can be accomplished using the Ford cam positioning tools.
  • Cam positioning is a critical procedure on today`s computer-controlled vehicles. A camshaft can be timed in error, but the motor will still run. The ECM compensates for the error, but performance and mileage will be affected, and the vehicle`s "check engine" light may come on at some point.
  • Refer to the photos and application chart to edetermine the necessary tools for any Ford engine application. Note: some applications require more than one tool to accomplish the task. OTC Technical Support can be reached toll free at 1-800-533-6127 for additional assistance.

    Applications:
  • 1997-2002 Contour 2.0L 4 cyl. DOHC Zetec
  • 1997-2002 Mystique 2.0L 4 cyl. DOHC Zetec
  • Same as Ford part number T97P-6000-A
OTC 6475 Ford Cam Positioning Crankshaft TDC Timing Pin

  • Model: 95056
  • Shipping Weight: 0.2lbs
  • Manufacturers Part #: 6475
  • Manufactured by: OTC Tools and Equipment
  • Also Known As: OT6475, OTC6475, OT6475, OTC-6475

Only 2 left in stock - order soon

$30.67

Add to Cart:

This product was added to our catalog on Friday 16 February, 2007.

Customers who bought this product also purchased...

OTC Tools and Equipment
Ford Cam Sensor Sync Tool T89P-12200-A

Ford Cam Sensor Sync Tool T89P-12200-A

Your Price: $27.27
OTC Tools and Equipment
Ford Cam Positioning Tool T94P-6256-CH

Ford Cam Positioning Tool T94P-6256-CH

Your Price: $121.41
Lisle
Universal Cam Adjuster

Universal Cam Adjuster

Your Price: $44.55
Assenmacher Specialty Tools
Spanner Wrench - VW Audi V159

Spanner Wrench - VW Audi V159

Your Price: $44.55
Lisle
Air Conditioning / Fuel Line Disconnect Tool Set

Air Conditioning / Fuel Line Disconnect Tool Set

Your Price: $8.26
List Price: $10 17% off
GearWrench
Feeler Gauge Valve-Tappet .008? to .026?

Feeler Gauge Valve-Tappet .008? to .026?

Your Price: $6.04

Customers Also Shopped For

OTC Tools and Equipment
Ford Cam Sensor Sync Tool T89P-12200-A

Ford Cam Sensor Sync Tool T89P-12200-A

Your Price: $27.27
OTC Tools and Equipment
Crankshaft TDC Timing Peg Ford T97P-6000-A

Crankshaft TDC Timing Peg Ford T97P-6000-A

Your Price: $56.86
OTC Tools and Equipment
Ford Camshaft Alignment Tool - T94P-6256-CH

Ford Camshaft Alignment Tool - T94P-6256-CH

Your Price: $21.28
OTC Tools and Equipment
Ford Cam Holding Tool T96T-6256-B

Ford Cam Holding Tool T96T-6256-B

Your Price: $57.16
OTC Tools and Equipment
Crankshaft TDC Timing Peg

Crankshaft TDC Timing Peg

Your Price: $53.10
Mopar Essential Tools
Timing Chain Holders

Timing Chain Holders

Your Price: $118.33
S & G Tool Aid
Top Dead Center Indicator

Top Dead Center Indicator

Your Price: $38.19
OTC Tools and Equipment
Ford 2.0L & 2.3L & 2.5L 4V Cam Tool Set

Ford 2.0L & 2.3L & 2.5L 4V Cam Tool Set

Your Price: $61.09
Assenmacher Specialty Tools
Mazda/Ford 2.3 L Timing Kit 3 Pc

Mazda/Ford 2.3 L Timing Kit 3 Pc

Your Price: $61.09
OTC Tools and Equipment
Crankshaft Rear Seal and Wear Ring Installer Ford

Crankshaft Rear Seal and Wear Ring Installer Ford

Your Price: $393.42
OTC Tools and Equipment
Ford Cam Positioning Tool T94P-6256-CH

Ford Cam Positioning Tool T94P-6256-CH

Your Price: $121.41
OTC Tools and Equipment
Crankshaft TDC Timing Peg Ford T97P-6000-A

Crankshaft TDC Timing Peg Ford T97P-6000-A

Your Price: $56.86

Customer Service

Popular Manufacturers

Popular Categories

Subscribe to our newsletter in order not to miss new arrivals, promotions, and discounts of our store

888-220-8350
ToolSource® PO Box 149 Salamanca, NY 14779