3/4" Hex Forcing Screw Puller Replacement Part

Product Description

The Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller Replacement Part is a replacement part for the Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller. It is made of steel and has a 3/4" hex head. The forcing screw is used to apply pressure to the puller jaws to remove stuck or seized fasteners.

Key Features

• Replacement part for the Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller
• Made of steel
• 3/4" hex head

Applications

The Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller Replacement Part is used to remove stuck or seized fasteners. It is commonly used in the automotive, industrial, and construction industries.

Benefits

• The forcing screw is made of steel for durability
• The 3/4" hex head provides a secure fit on the puller jaws
• The forcing screw is a replacement part for the Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller

Warranty

The Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller Replacement Part is backed by a one-year warranty.

Instructions

To use the Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller Replacement Part, follow these steps:

1. Assemble the puller according to the instructions.
2. Insert the forcing screw into the hole in the center of the puller jaws.
3. Apply pressure to the forcing screw with a wrench or impact wrench.
4. The pressure will cause the puller jaws to grip the fastener and remove it.

Safety

When using the Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller Replacement Part, be sure to take the following safety precautions:

• Wear safety goggles to protect your eyes from flying debris.
• Do not use a power impact wrench with any puller.
• Use the largest puller of jaw that fits the job.
• Use 3 jaws, if possible, square pullers to work.
• Shield work to protect yourself and bystanders.
• Use a light lubricating oil on the forcing screw.

Additional Information

The Stanley Proto Industrial Tools 3/4" Hex Forcing Screw Puller Replacement Part is available in the following sizes:

• 3/4"
• 1"
• 1-1/4"
• 1-1/2"
• 1-3/4"
• 2"

The forcing screw is also available in a variety of lengths.