Engraving Cutter 1/32" Shank 3/32" 105
Quality cutters for detail engraving, carving and routing in wood,
fiberglass, plastic and soft metals.
- Ideal for detail engraving,
carving and routing in wood, fiberglass, ceramics, plastic, jewelry and
soft metals
User Tips
- Secure objects to a stable
surface while working.
- For best results, insert the
accessory bit all the way into the tool and then back it out slightly
before tightening down. This provides plenty of shank for the collet or
chuck to hold onto the bit.
- Use the sides of the cutter
(rather than the tip) for effective cutting. The tip cuts poorly and
can break under pressure.
- Use higher speeds for hard
woods, slower speeds for metals and very slow speeds for plastics (to
avoid melting at the point of contact).
- If chattering occurs,
increase speed.
*
bit diameter inch:
1/32"
*
bit diameter mm:
0,8 mm
* color code:
Teal
* description:
Engraving Cutter
* shank diameter:
3/32", 2,4 mm
- Ideal for detail engraving,
carving and routing in wood, fiberglass, ceramics, plastic, jewelry and
soft metals
User Tips
- Secure objects to a stable
surface while working.
- For best results, insert the
accessory bit all the way into the tool and then back it out slightly
before tightening down. This provides plenty of shank for the collet or
chuck to hold onto the bit.
- Use the sides of the cutter
(rather than the tip) for effective cutting. The tip cuts poorly and
can break under pressure.
- Use higher speeds for hard
woods, slower speeds for metals and very slow speeds for plastics (to
avoid melting at the point of contact).
- If chattering occurs,
increase speed.
Dremel
105 Engraving Cutter 1/32" Shank 3/32" 
07.jpg "Uni-Ram Corp."){kind=small}
