|
Key Features:Freight prepaid to a business address with no lift-gate. Additional charges will apply for delivery to a residential address and for a lift-gate. Fast one-position operation takes half the steps. Returns the tool to same position on the wheel after each cycle. Tall positioning pin eliminates adapters for front wheel drive, high offset wheels. Two-position detent mechanism limits travel of lower bead loosening shoe on narrow rims. Large internal surge tank.
Specifications:- Rim Diameter: 10" x 17.5
- Rim Width 19" Maximum
- Tire Diameter: 38" Max Outside
- Type of Drive System: Air Only
- Required Air Source: 110 to 175 PSI 2HP Compressor 5 SCFM min. at 150 PSI
- Chassis Footprint: 53"W x 17.5"D x 42" H
- Shipping Weight: 575 Lbs.
- Operation: One Wheel Positions 1st-Loosen Bead/Mount & Demount in the Same Position
- Wheels Handled: Alloy Using Optional Access. & Steel
- Mount/Demount Mechanism: Separate Cone Mounts On Center Post
- Tool Head Offset: N/A
- Shape Of Tabletop: Contoured for Perimeter Support of the Wheel
- Wheel Clamping Method: Centering Cone Mounts On Center Post
- Height of Table From Floor: 28.5"
- Bead Loosening System: Foot Control Actuates 7" and 5" Auxiliary Cylinder That Loosens Both Simultaneously On Wheels up to 19" Wide
- Drive System Options: Air Drive, Powered br Dual Chrome Plated Air Cylinders
- Pressure Limiter: Standard
- Bead Seating Reservoir: Located at an Internall ASME Tank With a 7.5 Gal. Capacity
- Position of Inflation Gauge: Permanently Mounted in Upper Tower
- Inflation Gauge: Easily Calibrated 0 to 60 PSI Gauge w/Damage Resistant Lexan Faceplate
- Air Supply Gauge (CAL OSHA): 0 to 300 PSI
- Water Filter: None
- Oil/Lubricator: None
- Storage Tray: Standard
- Inflation Guard System: None
- Nylon Demount Head: Optional
Ammco-Coats 4050A Center Post Style Tire Changer
|
