|
This item requires additional Freight handling. It is either oversized, requires special handling, or will only ship by truck line. Additional shipping charges will be applied at billing. Call ToolSource Customer Service at 1-888-220-8350 for shipping cost. Click here for shipping details.
Four adjustable load support arms.Aligns splines and bolt holes.Adjusts to .030 inches or less.Double pump handle allows jack to operate from either side.Release valve easily accessible for sensitive lowering.Made in U.S.A.
Specifications:- Capacity: 1/2 Ton
- Low Height: 3 1/4"
- High Lift Point: 26 1/4"
- Lifting Head Height: 9" x 9"
- Chassis Length: 33"
- Chassis Width: 20"
- Forward Tilt: 70°
- Rearward Tilt: 20°
- Sideways Tilt: 25° L & R
WARNING: Only use adapters that are specifically made for the product. Always follow the instructions accompanying the product for safe and proper use.WARNING: Transmission jacks are for removing, transporting and installing transmissions or specified components only. Do not tilt or support a vehicle with a transmission jack. Use only on a hard level surface. Use the safety chains to secure the transmission. Always follow the instructions accompanying the product for safe and proper use.WARNING: Engine stands are for supporting the engines only. Make sure the engine is centered and secured to the mounting plate. Use only on a hard level surface. Always follow the instructions accompanying the product for safe and proper use.
1/2 Ton Capacity Hydraulic Transmission Jack
|
