Brake Cylinder Flex-Hone - 2-3/8 x 8 In - 180 Grit

2-3/8" x 8" Brake Cylinder Flex-Hone - 180 Grit


Key Features:

  • Silicon carbide abrasive type.
  • A resilient, flexible honing tool with a soft cutting action.
  • The abrasive globules each have independent suspension that assures the Flex-Hone(R) to be self-centering, self-aligning to the bore, and self-compensating for wear.

Applications:

  • Used for honing brake cylinders.

Benefits:

  • Provides a smooth, even finish on the brake cylinder bore.
  • Helps to extend the life of the brake cylinder.
  • Makes the brake cylinder easier to operate.

How to Use:

  1. Inspect the brake cylinder bore for any damage.
  2. Apply a light coat of honing oil to the brake cylinder bore.
  3. Insert the Flex-Hone(R) into the brake cylinder bore and turn it clockwise until it is fully seated.
  4. Hone the brake cylinder bore for 10-15 strokes.
  5. Remove the Flex-Hone(R) from the brake cylinder bore and wipe it clean.
  6. Inspect the brake cylinder bore for any damage.
  7. Apply a light coat of brake fluid to the brake cylinder bore.

Warnings:

  • Do not use the Flex-Hone(R) on a brake cylinder that is damaged.
  • Do not use the Flex-Hone(R) on a brake cylinder that is leaking.
  • Do not use the Flex-Hone(R) on a brake cylinder that is hot.
  • Do not use the Flex-Hone(R) on a brake cylinder that is under pressure.

Cautions:

  • Use caution when using the Flex-Hone(R).
  • Wear gloves when using the Flex-Hone(R).
  • Keep the Flex-Hone(R) out of reach of children.
  • Model: 96492
  • Manufacturers Part #: BC2-3/8-180SC
  • Manufactured by: Brush Research
  • Also Known As: BRMBC2-3/8-180SC, BSBC23818

Only 1 left in stock - order soon

$27.74

Add to Cart:

This product was added to our catalog on Thursday 01 February, 2007.