|
Registered design, clicking torque wrench with mount for interchangeable insert tools, rapid, accurate setting using QuickSelect quick-action adjuster, with QuickRelease safety lock, double stop signals, very clear twin scales with colour coded N m/ft.lb and ft.lb/inch.lb markings and long-term repeated accuracy.
The measuring element is only under load while force is being applied, no need for manual reset to zero.
All the sensitive components are protected by the sturdy housing. The 2-component handle with its ergonomically designed green softer layers is resistant to oils, grease, fuels, brake fluids and Skydrol. Any force applied to the tool after the "click" or applied in the opposite direction to the current function - e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it. The swap-over inserts can also be used to apply torque in an anticlockwise direction.
Features: - Easily adjustable without disassembly, e.g. using tester No 7707 W or calibration system No 7706.
- Deviation of indication ± 3%.
- With certificate.
Technical Data:- Code 50581020
- EAN code 4018754139590
- EClass 5.1 21040222
- Size a/20
- Scale Range 350-1800 in.lb
- Scale Range 30-150 ft.lb
- Scale Division 100 in.lb
- Scale Division 5 ft.lb
- Fine scale Scale Division 10 in.lb
- Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) mm 14 x 18
- Weight g 1489 g (3.28 Lbs)
Stahlwille 50581020 730N Service MANOSKOP Torque Wrench
|
