Power Equipment for your Service Vehicle All-in-one designed to meet the needs of today's mobile service mechanics- providing air poer, AC power and DC welding.
Dimensions
- 38"W x 50"D x 25"H, 850 lbs.
- Unit footprint without fuel
tank and control box: 38"W x 46"D
Engine
- Electric start, air cooled
Kohler Command OHV V-Twin
- Includes 6 gallon side mount
fuel tank (removable)
DC Welding
DC Stick 40 - 250 amp – 225 amp 60% duty cycle
Cables
25 ft. 1/0 ga. welding cables included
AC Power
6000 watt 60 hz (while not welding), Synchronous, brushless, AC
generator
Outlets
- one 120 volt, 20 amp duplex
outlet
- one 120 volt, 30 amp twist
lock outlet
- one 240 volt, 20 amp twist
lock outlet
Air Power
- 23 CFM @ 100 psi, 150 psi max
- Air gauge on control panels
monitors air tank pressure
Air tank required, sold separately.
Jump
Starting
- 12 volt, 700 amp; 24 volt,
400 amp
- 30 ft., 1/0 ga. welding
cable allows flexibility and ease of use
- 1000 amp full-power clamps
allow higher amperage flow
- Voltage Control provides
regulated voltage that is safe for vehicles and on-board electronics
- Reverse Current Shutdown
Protection eliminates expensive repairs to the
Start•All® if the unit runs out of gas
- Reverse Polarity Protection
will not allow the Start•All® to be turned on if the
cables are not hooked up correctly
- Polarity and low battery LED
indicators confirm proper connections
- Antizap surge protection
provides safer boosting
Control
Panel
Plug and play feature of control panel for easy remote mounting.
Requires extension harness for distances beyond 12"
Control
Box Dimensions
18"W x 5"D x 12"H, bottom of unit to bottom of control box is 12"
Installation
Goodall® Power Center provide for a compact and clean
installation. Installation time is reduced and simplified with these
easy bolt-in packages, compared to the installation of separate
components.
Options
& Accessories
- 950-0856
ft. Control Panel Harness
- 950-08812
ft. Control Panel Harness
- 950-15318
ft. Control Panel Harness
- 250-022L13
Gallon Rear Mount Fuel tank Upgrade (factory installed) from standard 6
gallon side mount
- 350-08750
ft. Welding Cable Upgrade
- 450-04450
ft. Boosting Cable Upgrade
- 550-05630
CFM Air Compressor Upgrade
- 61-13030
gallon Vertical Mount Air Tank
- 61-13130
gallon Horizontal Mount Air Tank
- 50-44312
gallon Horizontal Mount Air Tank
850 Lbs
$85 standard freight fee. Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.
- *An additional $40.00 will apply to all residential deliveries of heavy-equipment.
- *For lift-gate service, add $135.00.
Manufacturer drop ship.
Goodall 05-000 GPC 5000 with Welder, AC Generator, Air Compressor and Jump Starting
07.jpg "Uni-Ram Corp."){kind=small}
