Micrometer Wrenches - 3/8"

Micrometer Wrenches - 3/8"

Micrometer wrenches are precision measuring tools used to measure the outside diameter of a workpiece. They are typically made of hardened steel and have a range of 0-1 inch. The most common type of micrometer wrench is the 3/8", which has a range of 0-0.375 inches.

Micrometer wrenches are used to measure the outside diameter of a workpiece by placing the jaws of the wrench around the workpiece and turning the thimble until the pointer aligns with the anvil. The measurement is then read from the scale on the thimble.

Micrometer wrenches are a valuable tool for any automotive mechanic, as they can be used to measure the size of bolts, nuts, and other fasteners. They are also useful for checking the clearance between parts and for making sure that parts are properly installed.

Types of Micrometer Wrenches

  • Outside micrometer wrenches: These are the most common type of micrometer wrench and are used to measure the outside diameter of a workpiece.
  • Inside micrometer wrenches: These are used to measure the inside diameter of a workpiece.
  • Depth micrometer wrenches: These are used to measure the depth of a hole or slot.
  • Thread micrometer wrenches: These are used to measure the pitch of a thread.

Features of Micrometer Wrenches

  • Range: The range of a micrometer wrench refers to the maximum measurement that the wrench can take.
  • Resolution: The resolution of a micrometer wrench refers to the smallest increment that the wrench can measure.
  • Accuracy: The accuracy of a micrometer wrench refers to the amount of error that is present in the measurement.
  • Durability: The durability of a micrometer wrench refers to how well it can withstand wear and tear.

When to Use a Micrometer Wrench

Micrometer wrenches should be used whenever a precise measurement of the outside diameter of a workpiece is required. They are also useful for checking the clearance between parts and for making sure that parts are properly installed.

How to Use a Micrometer Wrench

To use a micrometer wrench, follow these steps:

  1. Clamp the jaws of the wrench around the workpiece.
  2. Turn the thimble until the pointer aligns with the anvil.
  3. Read the measurement from the scale on the thimble.

Tips for Using a Micrometer Wrench

  • Make sure that the jaws of the wrench are clean and free of dirt or debris before using them.
  • Use the correct size of wrench for the workpiece.
  • Be careful not to overtighten the wrench, as this could damage the workpiece.
  • Read the measurement carefully and make sure that it is accurate.